User manual PANASONIC WJ-FS316

[. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Caution: To assure continued compliance, (example use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. SA 1966 Power disconnection. [. . . ] JAPANESE/ENGLISH/FRANÇIS/ESPAÑOL/DEUTSCH/ ITALIANO/RUSSIAN/CHINESE Important: Displaying the language of the browser used to access the unit from a PC will not be changed even though this setting is changed. SETUP MENU Quick Display REC & Event 2 Network LIVE Monitor 1 Monitor 2 STEP CAM PRESET DWELL STEP CAM PRESET DWELL I Date Format 2s 1 1 -1 1 --MMM. DD. YY 2s 2 -2 2 --12h 2s I Time Format 2s 3 3 -3 3 -2s I Time & Date 2s 4 4 -4 2s JAN . 5 5 -2s 5 5 -2s SET 6 6 -2s 6 6 -2s L-UPPER I Time & Date Display Position 7 7 -2s 7 7 -2s 8 8 -8 8 -- SETUP 2s I Camera Title 2s 9 9 Camera Title Display Position -2s 9 9 --R-LOWER 2s I 10 10 Live Sequence -2s 10 10 -- SETUP 2s I 11 11 -2s 11 11 -2s 12 12 -2s 12 12 -2s I Summer Time (Day Light Saving) 13 13 -2s 13 13 --AUTO 2s 14 14 -2s 14 14 --ON 2s I Beep (Operation) 15 15 -2s 15 15 --ENGLISH 2s I Language 16 16 -2s 16 16 -2s Advanced Menu b Rotate the jog dial to select a preset position number for which image is displayed in "STEP 1" from the following. 1 - 256: Moves to the selected preset number. --: Does not move to the preset position. n Select "DWELL" in "STEP 1" using the arrows button. [Screenshot 5] The cursor moves to"DWELL" in "STEP 1". SETUP MENU Quick Display LIVE Monitor 1 Monitor 2 STEP CAM PRESET DWELL STEP CAM PRESET DWELL I Date Format 2s 1 1 -1 1 --MMM. DD. YY 2s 2 -2 2 --12h 2s I Time Format 2s REC & Event 2 3 3 -3 3 -2s I Time & Date 2s 4 4 -4 2s Network JAN . 5 5 -2s 5 5 -2s SET 6 6 -2s 6 6 -2s I Time & Date Display Position 7 7 -2s 7 7 --L-UPPER 2s 8 8 -8 8 -- SETUP 2s I Camera Title 2s 9 9 -2s 9 9 --R-LOWER 2s I Camera Title Display Position 10 10 Live Sequence -2s 10 10 -- SETUP 2s I 11 11 -2s 11 11 -2s 12 12 -2s 12 12 -2s I Summer Time (Day Light Saving) 13 13 -2s 13 13 --AUTO 2s 14 14 -2s 14 14 --ON 2s I Beep (Operation) 15 15 Language -2s 15 15 --ENGLISH 2s I 16 16 -2s 16 16 -2s Advanced Menu m Rotate the jog dial to select an interval time to go to the next sequential step from 1 - 30 seconds (in 1 second intervals). The sequence step is skipped when "0 s" is selected. Repeat steps 2 and 7 to set for the other sequence steps. The settings for the sequential display are set and the sequence setting menu closes. 8 Summer Time (Day Light Savings) Select the method of switching to summer time from the following. AUTO: Applies summer time in accordance with the setting of summer time. 96 I [REC & Event] Perform the settings for the basic recording and the settings for event actions of each event type (motion detection, video loss, command alarm and terminal alarm. ) SETUP MENU Quick Display REC & Event Network [Screenshot 2] The REC Camera pop-up menu will be displayed. SETUP MENU Quick Display REC & Event Network LIVE I REC Type I REC Camera I Resolution REC Camera I Manual REC 1 QUICK SETUP FIELD 4 5 13 6 14 7 15 30ips / 16CH 8 FQB 16 30ips / 16CH FQB 30s ALARM SETUP OFF SETUP LIVE I9Event REC 10 11 REC Rate 2 3 Quality I REC Type I REC Camera I Resolution I Manual REC I Event REC REC Rate Quality QUICK SETUP FIELD 30ips / 16CH FQB Advanced Menu 12 REC Rate Quality Time Operation Mode I Event Setup I Power ON Manual REC I VMD Setup REC Rate Quality Time Operation Mode 30ips / 16CH FQB 30s ALARM SETUP OFF SETUP Advanced Menu I Event Setup I Power ON Manual REC I VMD Setup 8 REC Type Select "QUICK" or "ADVANCED" for validation of the recording settings. OFF/2 ips/3 ips/5 ips/6 ips/7. 5 ips/10 ips/15 ips/30 ips/ 60 ips/120 ips Note: The camera channel number selected for "REC Camera" will be displayed next to the selected recording rate. Note: The available recording rate differs depending on the selected solution. Resolution FRAME 3D ON/FRAME 3D OFF FIELD SIF Maximum recording rate 30 ips 60 ips 120 ips 8 Event Setup Perform the settings for the alarm output duration and the buzzer sound duration for each event type (motion detection, video loss, command alarm and terminal alarm). [Screenshot 1] Start operation from the "REC & Event" menu. SETUP MENU Quick Display REC & Event Network LIVE I REC Type I REC Camera I Resolution I Manual REC I Event REC REC Rate Quality QUICK SETUP FIELD 30ips / 16CH FQB 30ips / 16CH FQB 30s ALARM SETUP OFF SETUP REC Rate Quality Time Operation Mode The following are available for "Quality" (image quality). SFA/SFB: Top quality (SUPER FINE) FQA/FQB: High quality (FINE) NQA/NQB: Standard quality (NORMAL) EXA/EXB: Low quality (EXTENDED) **A is suitable for less dynamic images. **B is suitable for more dynamic images. The following are available for "Time" (recording duration). 1 s - 10 s (in 1 second intervals)/20 s/30 s/1 min - 10 min (in 1 minute intervals)/20 min/30 min/ 40 min/ 50 min/ 60 min MANUAL: Recording duration differs depending on the event type as follows; When a motion is detected: Recording will be performed for 8 seconds When a video loss has occurred: Recording will be performed while the video signal is lost. When a terminal alarm has occurred: Recording will be performed while the alarm signal is being supplied. When a command alarm has occurred: Recording will be performed for 8 seconds. CONTINUE: Record until the ALARM RESET button is pressed. Advanced Menu I Event Setup I Power ON Manual REC I VMD Setup z Move the cursor to "Event Setup" using the arrows button (C D) and press the SET button. [. . . ] (page 53) After completing the settings for data copy in step 3, move the cursor to the SIZE button using the arrows button and press the SET button to start the recorded images size calculation. (Skip this step when it is unnecessary to calculate approximate size. ) Notes: · When the available disk space is displayed as "--KB", check the following. · Check if "Disk End Mode" is set to "STOP". (page 136) · When the available disk space is displayed as "**KB", check the following. [. . . ]