User manual PANASONIC WJ-HD100

[. . . ] Operating Instructions Model No. WJ-HD100 DEUTSCH TIMER OPERATE HDD FULL LOCK DISPLAY SEL ECT SETUP/ESC STOP MEMORY CARD ALARM SUSPEND SUMMER TIME PLAY REC / PUSH LCD CONTRA ST MODE SELE ALARM SEA CT RCH STEP PAUSE SET / REW/FF Digital Di / sk Reco / rder WJ-H D Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ESPAÑOL FRANÇAIS ENGLISH Digital Disk Recorder ENGLISH VERSION We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336. Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta conforme ai seguenti standard o altri documenti normativi conformi alle disposizioni delle direttive CEE/73/23 e CEE/89/336. Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatieve documenten, overeenkomstig de bepalingen van Richtlijnen 73/23/EEC en 89/336/EEC. Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i overensstemmelse med standarder eller andre normative dokumenter i følge bestemmelserne i direktivene 73/23/EEC og 89/336/EEC. [. . . ] Playing back will stop once when the time comes to 24:00, then will restart with different portion based on the renewed day count. SYSTEM SETUP FWD/REW MODE PASSWORD LOCK ALL OPERATION KEYLOCK BUZZER RESET PULSE TIME ADJUSTING SET TIME AUTO ERASING SKIP&PLAY OFF ***** ***** OFF HIGH SLAVE 9:00 OFF 1. Move the cursor to TIME ADJUSTING with the [v] or [w] button. Select either MASTER or SLAVE with the JogDial. MASTER: The unit supplies the calibration OUT signal to the slave units. SLAVE: The internal timer of the unit is supplied the calibration signal from the master. 23 s REC SETUP Picture quality and field rate are selected as a set or individually. q Recording Field Rate 202 REC RATE The field rate or number of fields per second can be selected in SP mode. The higher the field rate, the more information the recording will contain. q Recording Mode 201 REC MODE Select one of the following 5 basic options: super fine (SF, level 10), fine (FQ, level 8), normal (NQ, level 7), long-time recording (EX, level 5) and optional (SP). If combined with audio (A) recording, the number or modes doubles as shown below. The selected recording mode determines the remaining recording time which is displayed on the monitor and on the LCD. In the SP mode, the field rate and picture quality are variable and can be selected at option in the range of 0. 1 to 12. 5 fps and level 1 to 10, respectively. After the recording mode has been selected, the available time is calculated and displayed. "xxx" in the table is replaced with the calculated available time. REC MODE REC RATE REC QUALITY SP- 12H 12. 5FPS 10(1-10) DISPLAY SELECT LCD CONTRAST 1. Move the cursor to REC RATE with the [v] or [w] button. Select the desired rate (from 0. 1FPS to 12. 5FPS) with the JogDial. The default value is 12. 5 fps. REC SETUP REC MODE REC RATE REC QUALITY SF- 12H 12. 5FPS 10(1-10) q Recording Quality 203 REC QUALITY A picture quality from level 1 to 10 can be selected in SP mode. The higher the level number, the better the picture quality will be. DISK END MODE STOP DISK END BUZZER ON JOG/EXT REC REC MODE JOG CLICK SF- 12H REC MODE REC RATE REC QUALITY SP- 12H 12. 5FPS 10(1-10) DISPLAY SELECT DISPLAY SELECT LCD CONTRAST LCD CONTRAST 1. Move the cursor to REC MODE with the [v] or [w] button. Select the desired mode with the JogDial. Rec Mode SF-xxxH FQ-xxxH NQ-xxxH EX-xxxH SF-AxxxH FQ-AxxxH NQ-AxxxH EX-AxxxH Quality Super Fine (10) Fine (8) Normal (7) Long time (5) Super Fine (10) Fine (8) Normal (7) Long time (5) Audio Record N/A N/A N/A N/A Available Available Available Available Available N/A Note 1. Move the cursor to REC QUALITY with the [v] or [w] button. Select the desired quality (from level 1 to 10) with the JogDial. The default value is level 10. SP-AxxxH Optional setup SP-xxxH Optional setup Field rate, quality selected optionally Field rate, quality selected optionally "xxx" in the table will be replaced by a calculated recording time of 6, 12, 18, 24, 48, 72, 96, 120, 170, 180, 240, 480 or 960 hours. "xxx" for SP is specified in REC MODE table in ADDENDUM attached to the manual. 24 q Disk End Mode Setup 204 DISK END The menu offers the following four options at the point where the available recording space on the disk is used up: [STOP], [CONTINUE], [ALM CONTINUE] and [SERIES]. [. . . ] Once the final unit reaches FULL, operate the first unit to restart series recording as follows. Set DISK END MODE in the REC SETUP to other than STOP, then close the setup menu. Return to the above step 1 in the Setup, and follow the procedures. q Playback To play back a series recorded image, press the PLAY button on the unit. Refer to page 12 of the Operating Instructions for the monitor connection. 46 s Communication Protocol The following pages detail the elements for communication between the Digital Disk Recorder and the personal computer. [. . . ]