User manual PANASONIC WJ-HD220

[. . . ] Digital Disk Recorder Operating Instructions Model No. WJ-HD220 ALARM OPERAT E SUSPEN RESET TIMER D REMOTE LOCK SUMMER TIME SPOT MULTI CAMERA SELECT OSD 1 SEQUEC E 2 6 3 7 HDD 4 8 MULTISCR EEN SELECT FULL ERROR ZOOM 5 SETUP /ESC STOP PLAY REC REC STO P ALARM SERCH TIME&D ATE SEARCH PLAY MOD E SELECT ALARM RECALL PUSH­ PAUSE SET Digital Dis k Recorde r WJ-HD2 20 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336. Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit der folgenden Normen oder normativen Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie 73/23/EEC und 89/336/EEC. Nous déclarons sous note seule responsabilité que le produit auquel se réfère la présente déclaration est conforme aux normes ou autres documents normatifs conformément aux dispositions des directives CEE/73/23 et CEE/89/336. [. . . ] Note: The recorder will skip any step assigned "­". Select the duration for the step with the JogDial, and press the JogDial. Available durations: 2-30S Available durations: 2-30S 3. Select the duration for the step with the JogDial, and press the JogDial. Move the cursor to the desired step using the [D] or [C] button. Select a camera number with the JogDial, and press the JogDial. The default camera number is identical to the step number. Available cameras: From 1 to 8. 42 4. Repeat steps 1, 2, and 3 until all steps are programmed, or press the [SETUP/ESC] button to return to the SEQUENCE SETUP menu. Procedures for SEQUENCE TIMING are the same as step 5 in MULTI SEQ SETUP. Procedures for AUTO SKIP are the same as in step 6 of MULTI SEQ SETUP. ON: Enables the secret view function. OFF: Disables the secret view function. I System Information (SYSTEM INFORMATION) SYSTEM INFORMATION G Camera View Setup (CAMERA VIEW SETUP) Open the CAMERA VIEW SETUP menu to program the live image of each camera channel to be displayed or vailed on the monitor. CAMERA VIEW SETUP CAM 1 2 3 4 5 6 7 8 MODE ON ON ON ON OFF OFF OFF OFF HDD1 HOUR METER HDD2 HOUR METER HDD CAPACITY DEFAULT SYSTEM VERSION SYSTEM LOGO 10000H 10000H XXX. XXG SET X. XX G HDD Hour Meter (HDD HOUR METER) The meter shows how many hours each hard disk has been operated in playback, recording and idle. The built-in HDD needs replacement when the hour meter reads around 30 000 H. 1. Move the cursor to the desired camera using the [D] or [C] button. Select ON or OFF with the JogDial, and press the JogDial. ON: Live image of the channel is displayed. Repeat steps 1 and 2 until all channels are programmed, or press the [SETUP/ESC] button to return to the SWITCHER SETUP menu, Notes: · Recording will be carried out regardless of this setting. · The recorded images of the channel will be played back and displayed on the monitor even if OFF is selected. G HDD Capacity (HDD CAPACITY) The total usable capacity of the built-in hard disk is indicated. G Default (DEFAULT) This enables the recorder to restore all setup data to the default values. Press the JogDial to move the cursor to DEFAULT. When the cursor is on SET, press the JogDial again. Select YES or NO with the JogDial, and press the JogDial. YES: Current setup data is reset to the default values. [. . . ] Changing the HTTP Port Number Changing the port number will limit unauthorized accesses such as port scanning. G For More Security Using Routers Authentication is doubled by use of routers: dividing into subnet, and verifying IP addresses by the recorder and the routers. Global IP Router IP Address: 192. 168. 1. 1 Subnetmask: 255. 255. 255. 0 WAN Router IP Address: 192. 168. 0. 1 Subnetmask: 255. 255. 255. 0 PC IP Address: 192. 168. 1. 100 Subnetmask: 255. 255. 255. 0 Default Gateway: 192. 168. 1. 1 Digital Disk Recorder IP Address: 192. 168. 0. 10 Subnetmask: 255. 255. 255. 0 Default Gateway: 192. 168. 0. 1 ALARM OPERATE RESET LOCK OSD SEQUENCE TIMER SUMMER TIME SPOT MULTI CAMERA SELECT HDD PUSH­ PAUSE SET SUSPEND REMOTE 1 5 2 6 3 7 4 MULTISCREEN SELECT FULL SETUP /ESC STOP ALARM SERCH PLAY REC REC STOP TIME&DATE SEARCH 8 ZOOM ERROR PLAY MODE SELECT ALARM RECALL Digital Disk Recorder WJ-HD220 Using Fire Wall A fire wall will apply packet filtering and protocol filtering to secure the recorder against unauthorized access. Global IP Router IP Address: 192. 168. 1. 1 Subnetmask: 255. 255. 255. 0 WAN Router IP Address: 192. 168. 0. 1 Subnetmask: 255. 255. 255. 0 Fire Wall Switching hub PC IP Address: 192. 168. 1. 100 Subnetmask: 255. 255. 255. 0 Default Gateway: 192. 168. 1. 1 Digital Disk Recorder IP Address: 192. 168. 0. 10 Subnetmask: 255. 255. 255. 0 Default Gateway: 192. 168. 0. 1 ALARM OPERATE RESET LOCK OSD SEQUENCE TIMER DSUMMER TIME SPOT MULTI CAMERA SELECT HDD PUSH­ PAUSE SET SUSPEND REMOTE 1 5 2 6 3 7 4 MULTISCREEN SELECT FULL SETUP /ESC STOP ALARM SERCH PLAY REC REC STOP TIME&DATE SEARCH 8 ZOOM ERROR PLAY MODE SELECT ALARM RECALL Digital Disk Recorder WJ-HD200 100 I Network Error Information G SMTP Errors Type POP3 server error Message Authentication error (POP3) Details User name or password may be incorrect. · IP address for the server may be incorrect. · POP3 server may be out of order. · Designation for DNS server may be incorrect. [. . . ]