User manual PANASONIC WJ-HD309A

[. . . ] Digital Disk Recorders Operating Instructions Model Nos. WJ-HD309A WJ-HD316A TIMER ALARM ALARM SUSPEND ERROR MONITOR1 MONITOR2 1 SHIFT 2 SEQ 3 OSD 4 PAN/ TILT STOP PLAY PAUSE REC-- REC STOP ALARM RESET DISK SELECT 5 9 EL-ZOOM COPY 6 TEXT 7 MARK 8 12 LOGOUT GOTO LAST OPERATE ZOOM/ FOCUS HDD 1 HDD 2 10/0 14 A-B REPEAT PAN/TILT SLOW SEARCH SETUP /ESC REV FWD PULL 11 15 IRIS LISTED 13 ­ + BUSY 16 PRESET /AUTO SET Digital Disk Recorder WJ-HD 316 A Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ENGLISH VERSION Caution: Before attempting to connect or operate this product, please read the label on the top and bottom. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. For U. S. A SA 1965 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] QUICK: The recording settings set on the SETUP MENU (Quick) will be validated when recording. ADVANCED: The recording settings set on the SETUP MENU (Advanced) will be validated when recording. Note: When "QUICK" is selected for "REC Type" of "REC & Event", the SETUP MENU (Quick) will be displayed by pressing the SETUP/ESC button for 2 seconds or more. When "ADVANCED" is selected for "REC Type" of "REC & Event", the SETUP MENU (Advanced) will be displayed by pressing the SETUP/ESC button for 2 seconds or more. x Select the desired camera channel for manual recording/event recording using the arrows button (C D A B) and rotate the jog dial. It is possible to select a camera channel by pressing a camera channel selection button (1 - 16 for the WJ-HD316A, 1 - 9 for the WJHD309A) on the front panel of the unit. The settings will be applied and the "REC camera" pop-up menu will be closed. 8 Resolution Select a recording resolution from the following. FRAME 3D ON: High resolution (720 x 480), with camera shake compensation FRAME 3D OFF: High resolution (720 x 480) FIELD: Standard resolution (720 x 240) SIF: Low resolution (360 x 240) Recording will not be performed for around 4 seconds when the SETUP MENU (Quick) was closed after changing the settings. Note: It is possible to minimize blurring to record fast moving objects by selecting "FRAME 3D ON". 8 REC Camera Select a camera channel for manual recording/event recording. [Screenshot 1] Start operation from the "REC & Event" menu. SETUP MENU Quick Display REC & Event Network 8 Manual REC LIVE I REC Type I REC Camera I Resolution I Manual REC I Event REC REC Rate Quality QUICK SETUP FIELD 30ips / 16CH FQB 30ips / 16CH FQB 30s ALARM SETUP OFF SETUP REC Rate Quality Time Operation Mode Perform the recording rate (REC Rate) and the image quality (Quality) for manual recording. The following are available for the recording rate. OFF/2 ips/3 ips/5 ips/6 ips/7. 5 ips/10 ips/15 ips/30 ips/ 60 ips/120 ips Note: The available recording rate differs depending on the selected solution. Resolution FRAME 3D ON/FRAME 3D OFF FIELD SIF Maximum recording rate 30 ips 60 ips 120 ips Advanced Menu I Event Setup I Power ON Manual REC I VMD Setup z Move the cursor to "REC Camera" using the arrows button (C D) and press the SET button. Note: The camera channel number selected for "REC Camera" will be displayed next to the selected recording rate. 97 The following are available for the image quality. SFA/SFB: Top quality (SUPER FINE) FQA/FQB: High quality (FINE) NQA/NQB: Standard quality (NORMAL) EXA/EXB: Low quality (EXTENDED) **A is suitable for less dynamic images. **B is suitable for more dynamic images. Note: When "MANUAL" is selected for "Time" (recording duration), recording will be performed for at least 8 seconds at an event occurrence as long as the alarm is not canceled. The following are available for "Operation Mode" (event action mode). Refer to page 49 for further information about each event action mode. ACT DET (Activity Detection Mode): Performs only recording, writing an event log and camera movement to a preset position at an event occurrence. Other event actions will not be performed. ALARM (Alarm Mode): Performs every event action according to the settings. OFF: Performs only recording of the event log. Other event actions will not be performed. 8 Event REC Perform the recording rate (REC Rate) and the image quality (Quality) for event recording (recording to be performed at event occurrence (motion detection, video loss, terminal/ command alarm and terminal alarm)). The following are available for "REC Rate" (recording rate). [. . . ] · Check if the selected COPY DRIVE is correct. · Check if the media is formatted correctly. · When the size of the recorded images is displayed as "00KB", check the following. · Check if at least one camera channel is selected or if images had surely recorded in the designated time range. [. . . ]