User manual PANASONIC WJ-HD316

[. . . ] Digital Disk Recorders Operating Instructions Model Nos. WJ-HD309 WJ-HD316 TIMER ALARM ALARM SUSPEND ERROR MONITOR1 MONITOR2 1 SHIFT 2 SEQ 3 OSD 4 PAN/ TILT STOP PLAY PAUSE REC-- REC STOP ALARM RESET DISK SELECT 5 9 EL-ZOOM COPY 6 TEXT 7 MARK 8 12 LOGOUT GOTO LAST OPERATE ZOOM/ FOCUS HDD 1 HDD 2 10/0 14 A-B REPEAT PAN/TILT SLOW SEARCH SETUP /ESC REV FWD PULL 11 15 IRIS LISTED 13 16 PRESET /AUTO BUSY SET Digital Disk Recorder WJ-HD 316 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336. Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit der folgenden Normen oder normativen Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie 73/23/EEC und 89/336/EEC. Nous déclarons sous note seule responsabilité que le produit auquel se réfère la présente déclaration est conforme aux normes ou autres documents normatifs conformément aux dispositions des directives CEE/73/23 et CEE/89/336. [. . . ] Refer to page 44 for further information. Display the error log such as a HDD error log. Display the time, user name and IP addresses when logging in/out to/from this unit. 92 92 92 93 93 93 94 94 95 Description Page 103 105 107 Event Program Special Days 88 Settings menu Switcher Monitor1 Monitor 2 Display OSD Setup Monitor1 Monitor2 Comm Camera Control PS·Data Setup Description Page Perform the settings for the image switching on monitor 1 such as the setting of the sequential display or the screen to be displayed at login on monitor 1. Perform the settings for the image switching on monitor 2 such as the setting of the sequential display or the screen to be displayed at login on monitor 2. Perform the display settings such as the settings for the display position of the camera title and the time. Perform the display settings for monitor 1 such as the camera title display on/off, the alarm display on/off and the time display on/off. Perform the display settings for monitor 2 such as the display mode (task bar style), the camera title display position, and the camera title display on/off. Set the communication type to control cameras for each camera channel. Perform the settings for the PS·Data. It is necessary to perform these settings when connecting an external device such as a controller to the DATA port on the rear panel of this unit. It is necessary to perform these settings when connecting an RS 485 compatible camera to the RS485 (CAMERA) port on the rear panel of this unit. Perform the settings for the SERIAL (RS232C). It is necessary to perform these settings when connecting a PC to the SERIAL connector on the rear panel of this unit. It is necessary to perform these settings when operating this unit via a network such as a LAN. The settings for the user authentication and the host authentication can also be set with these settings. Perform the network connection settings such as IP addresses and the gateway address. It is necessary to perform these settings when operating this unit via a network such as a LAN. Perform the NTP server settings such as the NTP server address and the time zone setting. It is necessary to synchronize the clock with the NTP server. Perform the settings for the basic operation of this unit. Perform the settings for the time adjustment and display of the time and date. [. . . ] The additional disk space of HDD is not displayed. · Check if there is a partition in the HDD. Refer to p. 93. ­ · Check if the "Disk End Mode" is set to STOP. The available disk space of HDD is not displayed on the right bar. [. . . ]