User manual PANASONIC WJ-HD500A

[. . . ] Digital Disk Recorder Operating Instructions Model No. WJ-HD500A (Ver. 2) REMOTO LOCK ALARM ALARM RESET 1 2 3 4 SET 5 6 TIMER SPOT MULTISCREEN 7 REC STOP GROUP SELECT PLAY PPAU SE 8 ALARM SUSPEND OPRATE HDD MULTISCREEN SELECT 9 10 11 + 12 REC REVIE W INDEX REV FS 16 FULL 13 14 15 16 EL-ZOOM ALARM SEAR CH FWD DISPLAY Digital Di sk Recorder WJ-HD5 00A Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ENGLISH VERSION We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336. Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit der folgenden Normen oder normativen Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie 73/23/EEC und 89/336/EEC. [. . . ] Move the cursor to the DYNAMIC REC parameter by pressing the D or C button, then select the recording pattern for post-recording by pressing the + or - button. OFF: Records the images assigned to group inputs, including the one that has activated the alarm (the same as pre-recording). ALM-ONLY: Records the particular image that has activated the alarm. Move the cursor to the AUTO COPY parameter by pressing the D or C button, then select alarm backup mode by pressing the + or - button. Press the SETUP/ESC button to return to the previous program number menu. 3. Move the cursor to the REC RATE parameter in the menu by pressing the D or C button, then select the desired recording rate by pressing the + or - button. 1 - 50FPS: Records the selected number of the freeze image per second. Notes: · The maximum recording rate depends on the selected parameters in the COMMON SETUP menu as shown in the table. FIELD/FRAME FIELD FRAME 3DIM ON FRAME 3DIM OFF CAMERA GENLOCK ON OFF ON OFF ON OFF REC RATE 50FPS 25FPS 8. 3FPS 8. 3FPS 25FPS 12. 5FPS · "FPS" indicates as field per second or frame per second when the FIELD/FRAME parameter is set to FIELD or FRAME in the menu. Move the cursor to the REC QUALITY parameter by pressing the D or C button, then select the desired image quality by pressing the + or - button. SUPER FINE: For enhanced sharpness (Compression Rate 1/6) FINE: For fine image quality (Compression Rate 1/10) NORMAL: For normal image quality (Compression Rate 1/16) EXTENDED: For extended time recording quality (Compression Rate 1/25) The factory default setting is SUPER FINE. Move the cursor to the PICTURE parameter by pressing the D or C button, then select the number of freeze images to be recorded by pressing the + or - button. 4 to 60: Records the selected number of freeze images for One Shot Recording. Move the cursor to the AUTO COPY parameter by pressing the D or C button, then select an alarm backup mode by pressing the + or - button. OFF: Disables backup for alarm recording. The factory default setting is OFF. One Shot Recording (Internal Timer) As described before, the One Shot Recording is an event recording function reacting to an alarm input. It records the number of particular images that have activated the alarm. These items let you determine the recording parameters for One Shot Recording assigned in the program number menu. Select the recording mode O/S in the program number menu by pressing the + or - button, then press the SET button. The selected One Shot Recording menu as shown below appears on the monitor screen. 3-1-1-1 PROG1-NO1-G1 REC SETUP O/S(EVENT:ONE SHOT) TRIGGER ACTION REC MODE REC RATE REC QUALITY PICTURES AUTO COPY REC+ALM 12. 5FPS SUPER FINE 16 OFF 2. Move the cursor to the TRIGGER ACTION parameter in the menu by pressing the D or C button, then select an active mode for group cameras when an alarm is received by pressing the + or - button. REC+ALM: Enables alarm recording and alarm activation. [. . . ] Press the DISPLAY button to display the record list or thumbnails with the search (SEARCH) editing area as shown in the figure. Move the cursor to the desired position in the search editing area by pressing the A or B button. Select the desired digit or month by pressing the + or - button. Repeat steps 5 and 6 to edit the other positions. [. . . ]