User manual PANASONIC WJ-MX1200AK

[. . . ] · The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus. · All work related to the installation of this product should be made by qualified service personnel or system installers. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN For Canada This Class A digital apparatus complies with Canadian ICES-003. For U. S. A CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. SA 1965 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Each time the [SET] button is pressed in the state of monitoring, the mode changes. The related icon is displayed in a lower area of the screen. · Pan/tilt control mode · Zoom/focus mode · Iris control mode Note: For some types of cameras, some controls many not function. Refer to the relevant operating instructions of the camera and confirm whether this unit is enabled to support controls and connections. PTZ SELECT Cam1 Cam5 OK Cam2 Cam6 Cam3 Cam7 Cancel Cam4 Cam8 Move the cursor to the desired channel by using the direction buttons (up/down). Select the channel by using the direction buttons (right/left). In the above figure, "Cam1" is selected in the "PTZ SELECT" menu. No other camera are selected in other channels. "WJ-MX1200AK SETUP MENU" appears. (5) Move the cursor to "CAMERA SETUP" and press the [SET] button. The "CAMERA SETUP" menu appears. When using the Panasonic's camera, select "PANASONIC" using the direction buttons (left/right). The zoom/focus mode is cancelled. 2. 5. 7 To move a camera to the home position (1) Press the [SET] button once to select the required camera control mode. An icon is displayed on the screen of that channel, according to the selected camera control mode. (2) The camera returns to the home position by pressing the [STOP] button. For the settings of the camera home position, refer to the operating instructions for the camera. If the camera is not a Panasonic, the present position is saved as an origin, in principle, if the [STILL] button is pressed in the camera control mode. For some cameras, however, this setup may fail. Refer to the operating instructions for the camera for details. 2. 5. 4 Focus (1) Select the zoom/focus mode by pressing the [SET] button twice. The zoom/focus icon is displayed on the screen of the selected channel. (2) Adjust the focus by pressing direction buttons (right/left). The zoom/focus mode is canceled. 2. 5. 8 To display the camera setting menu Prior to controlling the camera that has been connected to this unit, perform the settings for this camera, without fail, according to the "CAMERA SETUP" menu for this unit. The contents, operating method, and other items of the "CAMERA SETUP" menu can differ according to the camera being used. [. . . ] , 9 Enter a value 1 , 2 , . . . Change the cursor position Press a button on the pop-up menu Press a button on the pop-up menu Return to the previous menu SET CAM (SET) or SET CAM (SET) or ESC MON (ESC) SHIFT ALARM Alarm suspension ­ ALM SUSPEND Alarm reset ALARM RESET REC ALM RESET ALM ALL RESET Manual recording STOP REC REC STOP REC REC STOP Stop recording Press for 2 seconds or more PLAY Available only during recording Press for 2 seconds or more PLAY/PAUSE Play STOP STOP Stop playback 56 Operation Fast forward/rewind WJ-MX1200AK REV FWD WV-CU650 Note When the shuttle ring is rotated clockwise: Slow playback, Normal speed playback, >>, >>>>, >>>>>> Press for 2 seconds or more PLAY Slow playback When the shuttle ring is rotated counterclockwise: <<, <<<<, <<<<<< Pause playback PAUSE PLAY/PAUSE Available only during playback Press B. Skip to the next frame PLAY Available only during pause or (Only clockwise rotation is effective. ) Available only during playback Camera number Skip to the next/previous record Select a camera SKIP Camera selection buttons 1, 2, . . . , 8 5 CAM (SET) MULTISCREEN Select a multi-screen Switches in the following order each time the button is pressed 4-split screen (1-4 CH) 4-split screen (5-8 CH) 6split screen 9-split screen Select a camera channel Press D or C. CH number 5 MON (ESC) Available only when displaying on a multi-screen Select a camera to be displayed on the upper left area Camera selection buttons when displaying on a 6-split 1, 2, . . . , 8 screen Camera number 5 CAM (SET) Available only when displaying on a 6-split screen TOUR SEQ Sequential display ON SEQUENCE GROUP SEQ It is possible to stop the sequential display by pressing the [TOUR SEQ/GROUP SEQ] button while holding the [SHIFT] button down. TOUR SEQ GROUP SEQ SHIFT Pause the displayed image STILL After displaying the "Max Still (305)" submenu of the WVCU650 F1 Note: When the recorder is in the camera control mode ( ), some functions may be inoperable when controlling the recorder using the system controller. [. . . ]