User manual PANASONIC WJ-MX20
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PANASONIC WJ-MX20. We hope that this PANASONIC WJ-MX20 user guide will be useful to you.
Lastmanuals help download the user guide PANASONIC WJ-MX20.
Manual abstract: user guide PANASONIC WJ-MX20
Detailed instructions for use are in the User's Guide.
[. . . ] Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument, eller andra normativa dokument som framställs i EEC-direktiv nr. Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivien 73/23/EEC ja 89/336/EE. Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som følger bestemmelsene i direktivene 73/23/EEC og 89/336/EEC.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
For U. K. FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. [. . . ] Refer to the description of communication mode setting with the DIP switches on page 9.
s Setup Menu
q Panasonic Security Data mode (see page 12 - 15)
COMMUNICATION UNIT ADDRESS BAUD RATE DATA BIT PARITY CHECK STOP BIT WAIT TIME SYSTEM ALARM MODE MONITOR SPOT MONITOR SPOT ALARM DISPLAY SITE ALARM TERM. ALARM ALARM OUTPUT ALARM DATA COMP/VD2/DATA CAMERA IN COMP VD2 DATA VS/VD INPUT CAMERA CONFIG CAMERA CONFIG DAISY MODE TERMINAL SYSTEM ALARM MODE MONITOR SPOT ALARM DISPLAY SITE ALARM TERM. ALARM ALARM OUTPUT ALARM DATA COMP/VD2/DATA CAMERA IN COMP VD2 DATA VS/VD INPUT DAISY MODE TERMINAL
q Camera Communication mode (see page 16 - 19)
COMMUNICATION CAM ADDRESS CAM ADDRESS BAUD RATE DATA BIT PARITY CHECK STOP BIT WAIT TIME DELAY TIME XON/XOFF
11
s Displaying the Setup Menu for Panasonic Security Data Mode
1. Check that the cameras and peripherals are connected correctly and securely. Press the SETUP/ESC button for 2 seconds or more. The Setup menu appears on the monitor.
Note: · To not display the Setup menu for CAMERA OUT pictures, shift the internal switch. (See page 25. ) · To finalize the settings, press the SETUP/ESC button for 2 seconds or more while the Setup menu is displayed. · To use the System Controller WV-CU360 for operation, refer to its Operating Instructions.
WJ-MX20 SETUP MENU X. XX COMMUNICATION SYSTEM
s Communication Setup of Panasonic Security Data Mode
1. Move the cursor to COMMUNICATION by pressing button 1 (C) or button 2 (D). · In case of Panasonic Security Data mode, the COMMUNICATION menu appears as shown below.
4. Move the cursor up or down pressing button 1 (C) or button 2 (D). The COMMUNICATION menu or the SYSTEM menu appears on the monitor as shown below.
COMMUNICATION UNIT ADDRESS BAUD RATE DATA BIT PARITY CHECK STOP BIT WAIT TIME 1 9600 8 NONE 1 OFF
COMMUNICATION UNIT ADDRESS BAUD RATE DATA BIT PARITY CHECK STOP BIT WAIT TIME 1 9600 8 NONE 1 OFF
SYSTEM ALARM MODE ON COMP/VD2/DATA VS/VD INPUT VD CAMERA CONFIG DAISY MODE ON TERMINAL ALARM
3. ALARM ON or OFF by pressing button 3 () or button 4 (+). · Alarm Output Data (Alarm Output Duration from Alarm Connector) 1. Move the cursor to ALARM OUTPUT by pressing button 1 (C) or button 2 (D), then select the desired alarm output duration, 1S - 30S, 40S, 50S, 1MIN, 2MIN, 3MIN, 4MIN, 5MIN, EXT or OFF, by pressing button 3 () or button 4 (+). EXT: The alarm signal continues to be output from ALARM/REMOTE connector till the alarm is reset. 1S-5MIN: The alarm signal is supplied from ALARM/ REMOTE connector only for the set time. The alarm is automatically reset after the set time. (The ALARM indicator changes from blink to steady light. ) OFF: The alarm signal is not supplied from ALARM/ REMOTE connector. · Alarm Data This is to set whether or not the alarm data received from a camera is to be transmitted to the WV-CU360. OFF: Select this parameter if the system controller is not connected to the system, or if operation is to be controlled via an AV Codec. 0S: Each time an alarm is detected, it is notified to the system controller. 1S: When an alarm is detected, it is notified to the system controller. [. . . ] · The alarm indicator stops blinking. · Reset signal is supplied from the alarm reset output.
s Alarm Operation
ALARM MODE set to ON on the Setup menu (See pages 14 and 18 for details. ) · Alarm indicator blinks. · Alarm data is transmitted to the system controller and other system units. MONITOR SPOT set to ON on the Setup menu (See pages 14 and 18 for details. ) · The camera pictures change automatically to the spot where the alarm is activated. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC WJ-MX20
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC WJ-MX20 will begin.
