User manual PANASONIC WJ-ND300

[. . . ] Network Disk Recorder IP Quick Setup Tool Operating Instructions Model No. WJ-ND300 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Contents Limitation of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Disclaimer of Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For enhancing security, some cameras may not respond (not be detected) even though whose status is normal. Indicates that the network information of this camera is not conformed to the information registered in the recorder and the camera (IP address, etc. ) even though the camera is normally detected. This icon will be displayed when there is no available IP address for this camera or when failed to automatically assign an IP address to this camera. Indicates the 33rd detected camera or later. The settings for this camera will not be applied since the recorder can register up to 32 cameras. (New) (Edited) (Camera in normal status) (Not applicable) (Host name) Camera (Not detected) (Incorrect settings) (33rd or later) Indicates that the camera number of this camera has been changed since this camera is deleted or moved. It is necessary to register this camera in the recorder again. When this camera is registered in the recorder again, it is necessary to configure the settings since the settings such as the recording rate will return to the default settings. *2 The compression method will automatically be applied (JPEG/M-JPEG). *3 Check if the same IP addresses are not in use already even vacant IP addresses are searched and assigned automatically. When the message saying that no IP address is available is displayed, check the settings and perform "Manual Registration". 10 Detect recorders/cameras and confirm the current settings The detected recorders/cameras will be displayed with icons. The current network settings of the selected recorder/camera will be displayed in the network setting area. Screenshot 1 Start operation when displaying the main window. Step 1 Click the [Search] button. Screenshot 2 The search processing window will be displayed, and then the search result will be displayed. Step 2 Click the icon of the recorder/camera whose settings are to be checked. Notes: · When "+" displayed on the left of the recorder icon is clicked, the icons of the camera registered already or detected newly will be displayed. · When the PC and multiple recorders are on the same network, multiple icons (up to 16) will be displayed. · Order of the recorder icon displayed in the tree display area will change each time search is executed. 11 Screenshot 3 The network settings of the selected recorder/camera will be displayed. Notes: · When "ON" is selected for the host authentication function on the recorder, it is impossible to search recorders using a PC that is not allowed to edit the network settings of the recorder. · When search is executed by multiple PCs simultaneously, cameras may not be searched correctly. 12 Arrange the camera number by moving/deleting the camera icon The camera numbers will be assigned to each camera channel of the recorder in order of the camera icons displayed in the tree display area. The camera numbers can be changed by changing the order of the icons in the tree display area. By deleting the icons of the cameras from the tree display area, the deleted camera will not be registered. It will be useful to prevent registering unwanted cameras. Move a camera icon Screenshot 1 Start operation when the search result is displayed on the main window. Step 1 Drag the desired camera icon and drop to the desired point. (Dropped between 6 and 7 on screenshot 2. ) Note: Moving and copying the icon is unavailable when the respective camera is registered with the host name. Screenshot 2 The camera icon will be moved. Note: When multiple recorder icons are displayed, the camera icon can be copied onto the other recorder by drag and drop. 13 Delete a camera icon Screenshot 1 Start operation when the search result is displayed on the main window. Step 1 Click to select the icon of the camera not to be used with the recorder. Screenshot 2 The settings of the selected camera will be displayed. Step 2 Click the [Delete] button. Step 3 Click the [OK] button when the confirmation window is displayed. 14 Screenshot 3 The selected camera icon will be deleted. Notes: · When the selected icon is deleted, the camera icons below the deleted icon will move up. However, the camera number of the camera registered with the host name (displayed with " ") will not be changed. [. . . ] · Is the connection indicator of the 100BASE-Tx port lit?When it is not lit, connection to a LAN is not established or a network is not working correctly. Confirm that the connection indicator of the 100BASE-Tx port is lit. Refer to a system administrator if it is not lit. [. . . ]