User manual PANASONIC WJ-ND400

[. . . ] Network Disk Recorder Operating Instructions Model No. WJ-ND400 1 2 3 4 5 6 7 8 9 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Contents Preface Preface Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 About these Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 System Requirements for a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Trademarks and Registered Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The images from a camera before an event occurs can be recorded and linked to the event (pre-event recording). · Display alarm messages A pop-up window appears to indicate an event has occurred. · Alarm indicator blinks Alarm indicator on the front of the recorder blinks. · Buzzer sounds The buzzer sounds according to the settings on the setup menu (refer to the Setup Instructions (PDF file)). · The camera goes to its preset position. The camera moves to a pre-registered preset position. Refer to "Camera control (page 29)" for information about registering preset positions. · Notify of an event occurrence by sending e-mails Alarm mail (notification of the time and date of an event) is sent to registered e-mail addresses when an event occurs. A JPEG image can be attached to this e-mail. Up to 4 addresses can be registered to receive the alarm mail. Refer to the Setup Instructions (PDF file) for information about settings. · Alarm signal output from the Alarm/Control connector on the rear panel of the recorder (Alarm output) When an event occurs, a signal is output from the Alarm/Control connector on the rear panel of the recorder to sound the buzzar. The time the signal is output is set on the setup menu (refer to the Setup Instructions (PDF file)). · Event log is recorded When an event occurs, the type of event and the time it occurred are recorded in an event log. · Images recorded during events are sent to an FTP server When an event occurs, images are recorded from when the event starts for a set period of time and are automatically sent to an FTP server. Refer to the Setup Instructions (PDF file) for information about settings. · A PC is notified of an alarm according to Panasonic alarm protocol settings When an event or error occurs, a PC is automatically notified regarding event or error information according to the [Panasonic alarm protocol] settings. Install the software (option) on the PC designated to receive and display event or error notification. Refer to the "readme. txt" file on the CD-ROM for details about the software. About event action Event action is the action done when an event occurs. Depending on the settings event action include, recording images, recording logs, sending external notification (mail notification, LED, buzzers, transmitting to FTP and others). Here, action that send external notifications are called alarms. Events (Terminal alarms, site alarms, and command alarms) Event action -Event recording -Log Alarm action -Mail notification -LED -Buzzer -FTP transmission Image of event/alarm action The recorder starts an event according to the settings when the following events occur. · Terminal Alarm : Signals from door sensors or other external devices are transmitted through the alarm terminal on the rear panel of the recorder. [. . . ] 55 Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 R RAID5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53, 54 RAID6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]