User manual PANASONIC WJ-NT104

[. . . ] 3 Monitor Images on a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Monitor images from a single camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Monitor images from multiple cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Action at an Alarm Occurrence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Level 1 only/Level 2 or higher/All users Default setting: All users Notes: · Images and audio will not be synchronized. Therefore, images and audio may not always match. · Audio may be interrupted depending on the network environment. Configure the settings relating to coaxial communication [Coaxial setup] Click the [Coaxial setup] tab on the "Camera setup" page. ( page 26) The settings relating to camera control and cable compensation with coaxial communication can be configured on this page. [Cable compensation] Select the desired settings for cable compensation (the function to compensate the attenuation of video input signals) according to the cable length. Perform the settings for the cable compensation properly according to the cable length. Otherwise camera pictures may not be displayed/ recorded correctly. * The following cable length settings are references when using RG-59/U, BELDEN 9259 (for NTSC models), 5C-2V (for PAL models) or equivalent cables. S: Less than 400 m {1 300 ft. } M: 400 m {1 300 ft. } to 700 m {2 300 ft. } L: 700 m {2 300 ft. } to 1 200 m {4 000 ft. } Default setting: S [CH No. ] Select a channel to configure the setting, and configure the following items. [DATA] Select "ON" or "OFF" to determine whether or not to control cameras with the coaxial communication. ON: Controls cameras with coaxial communication. Default setting: 1-8 Detection program Step 3 Select the channel to activate the AVMD from "CH No. ". Available value: 1 - 4 Step 4 Enter the preset position number to activate the AVMD in "Preset No. ", and click the [GO] button. Available value: (blank), 1 - 256 Step 5 Select the area to detect an intruder, object abandonmentt, or object removal. q Click one of the icons from "1-(Blu)" to "Bla" of "Area type". Step 1 Select the title of desired detection program from "Detection program", and click the [DISPLAY] button. Setup items will be displayed. 34 Notes: · Color in the ( ) beside the icon is the color to display the detection area. · Select a parameter from "P1 (Blu)" to "P3 (Yel)" when setting an area to detect an intruder. Alarm occurs when a moving object enters the area. It may take around 2 seconds since the person is detected until the alarm occurs. · Select "P (Bro)" when setting an area to detect the object abandonment or removal. Alarm occurs when an object is taken into the area or when the object is taken away from the area. · To detect the object abandonment or removal, it is necessary to shoot the background around 2 minutes to memorize the image before the object is abandoned or removed. [. . . ] When this occurred, update the driver of the display adapter to the latest version first. If updating the driver does not solve the problem, adjust the hardware acceleration as follows. The following are descriptions for when Microsoft® Windows® XP Professional SP2 is installed on the PC in use. (1) Right-click on the desktop and select "Properties" from the displayed pop-up menu. [. . . ]