User manual PANASONIC WJ-NT204

[. . . ] 4 System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 System Requirement for a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Trademarks and Registered Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] It is necessary to configure the network settings and register them in the recorder. Indicates a camera whose network settings are edited with this software. To apply the edited settings to the recorder/camera, it is necessary to register this camera again. Indicates that the network information of this camera is conformed to the information registered in the recorder and the camera. (Camera in normal status) Indicates that this camera is not applicable with this software to configure the network settings even though the network information of this camera is registered in the recorder. (Including cameras of other manufacturers) Network setting configuration is unavailable with this software. Indicates the camera whose host name is registered in the recorder, instead of IP address. Network setting configuration is unavailable with this software. Moving and copying the icon of this camera is also unavailable. Indicates a camera not detected even though its network information is registered in the recorder. For enhancing security, some cameras may not respond (not be detected) even though whose status is normal. However, the camera number of the camera registered with the host name (displayed with " ") will not be changed. · When the [Delete] button is clicked after selecting the recorder icon with " ", the selected recorder icon will be deleted from the tree display area. Important: When the camera number is changed once, the settings such as the recording rate will become "OFF" after registration. It is necessary to configure the settings again. 15 Edit the settings Edit the network settings of the recorder/camera such as IP address. Screenshot 1 Start operation when the search result is displayed on the main window. Step 1 Edit the network settings of the recorder/camera such as IP address. Step 2 Click the [Set] button after editing the settings. Notes: · It is possible to cancel the settings edited in step 1 and return to the previous settings by clicking the [Clear] button when the [Set] button is not clicked yet. · When the settings are changed once, the respective camera icon will turn to the edited icon ( ). · To register the newly detected camera ( ) without changing the network settings, click the [Set] button without changing the settings and display the edited icon ( ). The camera respective to the edited icon will be registered in the recorder. · When IP addresses are to be automatically assigned, do not change the settings of the cameras. [. . . ] · When the camera is already registered, the model number of the camera or the HTTP port number may be incorrect. When the user authentication of the camera is "ON", it is necessary to register the user name/password on the "Camera" page of the recorder. Check and edit the settings. No live image is displayed even though the camera icon is displayed. 21 Troubleshooting Contact your dealer if a problem cannot be solved even after checking and trying the solution or a problem is not described below. Symptom Cause/solution Reference pages · Is the Ethernet cable firmly connected to the 100BASE-Tx port? [. . . ]