User manual PANASONIC WJ-PB85C16

[. . . ] (5) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHOTOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCECAMERA'S PICTURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR THE PURPOSE OTHER THAN SURVEILLANCE 2 Features The HDD viewer (Hard Disk Drive Viewer) is the software that can play recorded images on the removable hard disk drive (that is removed from the WJ-PB85C16 and connected to a PC). By using this software, playback of recorded images searched using the search filters (such as the time and date filter), saving and printing of the paused playback image are also available. When the removable hard disk drive is needed to be checked, the removable hard disk drive can be checked using this software. WJ-PB85C16 Remove the removable hard disk drive. Optional interface cable (USB-SATA cable) Connect the removed hard disk drive with the PC. Removed hard disk drive PC in which this software is installed Note: Refer to the installation guide or the operating instructions (PDF) for how to remove the hard disk drive from the WJ-PB85C16. About copyright and license This software can be distributed and used only if you agree to the copyright and license agreement of this software. [. . . ] When installation is complete, the application will be added to "Programs" in "Start" and the shortcut will be created on the desktop. Important: Do not edit, remove, or move the directory path of the files above. Otherwise, this software may not function properly. Note: When re-installing this software is needed, the existing software must be uninstalled first. 6 Uninstalling This Software If required, uninstall this software as follows. Step 1 Open "Add or Remove Programs" in "Control Panel". The "Add or Remove Programs" window will be displayed. Step 2 Select "HDD Viewer" and click the "Remove" button. Step 3 Follow the uninstall wizard. 7 Connect the Removed Hard Disk Drive with the PC Connect the removed hard disk with the PC in which this software is installed as follows. Step 1 Remove the removal hard disk drive from the WJ-PB85C16. Note: Refer to the installation guide or the operating instructions (PDF) of the WJ-PB85C16 for how to remove the removable hard disk drive. Step 2 Connect the removed hard disk drive and the PC in which this software is installed using an optional interface cable. Note: Contact your dealer about the interface cable to be used to connect the removable hard disk drive and the PC. The path of the selected removable hard disk drive will be displayed in the HDD path display area on the tool bar. 12 Play recorded images on the removal hard disk drive Screenshot 1 Start operation from the operation window after selecting the connected removable hard disk drive. Step 1 Click the [PLAY] button. Playback of recorded images will start. displayed in the status display area. will be Notes: · The pointer on the slider will indicate the current playback point. · When playback is started by selecting a recording event listed in the search result, the selected recording event in the search result list will remain selected even when playback of the next recording event starts. (The recording event currently being played will not be highlighted in the search result list if it is not the selected recording event from the search result list. ) Descriptions of the playback operation buttons REV PLAY · Reverse playback will start. Pausing · Playback will be stopped when this button is clicked during playback. · The frame display and the reverse frame display are available only during playback or pause. Recording events can be searched by filtering as follows. About filtering Conditions for filtering DATE Event How to search Designate a time period and search images recorded in the designated period to play. Searches for images from the selected recording mode only. The following recording modes can be selected. Manual: Manual recording ( Operating instructions (PDF)) Schedule: Schedule recording ( Setup instructions (PDF)) Emergency: Emergency recording ( Setup instructions (PDF)) Site alarm: Recording at a site alarm occurrence ( Operating instructions (PDF)) Terminal alarm: Recording at a terminal alarm occurrence ( Operating instructions (PDF)) Command alarm: Recording at a command alarm occurrence ( Operating instructions (PDF)) SD memory: SD memory data ( Setup instructions (PDF)) Searches for images from the selected camera channel. Camera About displaying the recording event list window Number of the listed data Number of the listed data: The total number of the listed data will be displayed. [All List] button: Cancels filtering and lists all recording events. [. . . ] In this case, display the image with frame playback/reverse frame playback. 17 Save the Displayed Paused Playback Image Saving the displayed image as a jpeg file (extension: jpg) is available only when the image is paused. Screenshot 1 Start operation when playing the images. Step 1 Click the [PAUSE] button. Step 2 Click the [Save] button. Screenshot 2 The "Save As" window will be displayed. Step 3 Enter the file name and select "JPG (*. jpg)" for "Save as type". Step 4 Designate the folder and click the [Save] button. [. . . ]