User manual PANASONIC WJ-PB85Y08

[. . . ] Nous déclarons sous note seule responsabilité que le produit auquel se réfère la présente déclaration est conforme aux normes ou autres documents normatifs conformément aux dispositions des directives CEE/73/23 et CEE/89/336. Nosotros declaramos bajo nuestra única responsabilidad que el producto a que hace referencia esta declaración está conforme con las normas u otros documentos normativos siguiendo las estipulaciones de las directivas CEE/73/23 y CEE/89/336. Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta conforme ai seguenti standard o altri documenti normativi conformi alle disposizioni delle direttive CEE/73/23 e CEE/89/336. Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatieve documenten, overeenkomstig de bepalingen van Richtlijnen 73/23/EEC en 89/336/EEC. [. . . ] REC+ALM: Enables alarm recording and alarm activation. The ALARM display on the monitor is also disabled. Move the cursor to the REC RATE parameter in the menu by pressing the D or C button, then select the desired recording rate by pressing the + or - button. 1 - 50FPS: Records the selected number of freeze images every second. 0. 5FPS: Records a freeze image every 2 seconds. 0. 4FPS: Records a freeze image every 2. 5 seconds. 0. 3FPS: Records a freeze image every 3. 3 seconds. 0. 2FPS: Records a freeze image every 5 seconds. 0. 1FPS: Records a freeze image every 10 seconds. The factory default setting is 12. 5FPS. 5. Move the cursor to the PRE PICTURES parameter by pressing the D or C button, then select a number of the pre-recording image by pressing the + or - button. It records the number of particular images that have activated the alarm. These items let you determine the recording parameters for One Shot Recording assigned in the program number menu. Select the recording mode O/S in the program number menu by pressing the + or - button, then press the SET button. The selected One Shot Recording menu as shown below appears on the monitor screen. 3-1-1-1 PROG1-NO1-G1 REC SETUP O/S(EVENT:ONE SHOT) TRIGGER ACTION REC MODE REC RATE REC QUALITY PICTURES AUTO COPY REC+ALM 12. 5FPS SUPER FINE 16 OFF 2. Move the cursor to the TRIGGER ACTION parameter in the menu by pressing the D or C button, then select an active mode for group cameras when an alarm is received by pressing the + or - button. REC+ALM: Enables alarm recording and alarm activation. The ALARM display on the monitor is also disabled. The factory default setting is REC+ALM. 7. Press the SETUP/ESC button to return to the previous program number menu. 55 Recording-camera Setup Any of the cameras can be excluded from the specific timer recorder by this setting. In the 3-1 PROG1 window, for example, move the cursor to the desired timer recorder from 1 to 4, and then press the SET button. The REC CAM SETUP menu for the selected timer recorder appears on the monitor screen displaying the assigned camera group for each camera. 3-1-1-5 PROG1-NO1 REC-CAMERA SETUP CAM GROUP 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 CAM GROUP 9 1 10 1 11 1 12 1 13 1 14 1 15 1 16 1 Emergency Recording (Time Lapse Recording) The Emergency Recording is given priority to record all video inputs in Time Lapse Recording reacting to a signal input form the CONTROL port. [. . . ] The procedures described below are for playing back the backup disk. Note: To enable this function, the AUTO COPY(ALARM) and AUTO COPY(EMERGENCY) parameters on the DVD menu must be set to OFF. Insert the backup disk to be played back into the respective drive unit. Press the INDEX button to display the record list of the Disk Recorder on the Multiscreen Monitor as shown below. [. . . ]