User manual PANASONIC WJ-RT416

[. . . ] Digital Disk Recorder Installation Guide Model Nos. WJ-RT416 WJ-RT416V HDD SEQUENCE 1 ERROR 2 1 MULTI SCREEN 2 6 10/0 3 7 11 15 ALARM 4 SETUP SEARCH 3 TIMER 5 9 13 COPY STOP PLAY 4 8 12 ESC PAUSE REC REC STOP OPERAT E 5 ALARM RESET REV FWD SKIP 6 14 16 SET Digital Di sk Reco rder WJ-R T416 WJ-RT416 is shown above. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. No model number suffix is shown in this Operating Instructions. We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006/95/EC and 2004/108/EC. Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit der folgenden Normen oder normativen Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie 2006/95/EC und 2004/108/EC. [. . . ] When logged in, the indicator on the arrows button will light. When failed to log in, the error message window will be displayed. Note: The default password is different according to the user level as follows. Manager1: 12345678 Operator1: 123456 Viewer1: 1234 Operation restriction differences between the user levels Logout Live image display Camera channel selection/ Multi-screen selection Camera channel selection using the cursor Sequential display control Mute control Manual recording control Alarm reset Playback recorded images/Playback control (Search/Copying) Setup menu *1 ­ ­ ­ ­ ­ ­ ­ Viewer *1 9 9 9 ­ ­ *1 *2 Operator *1 9 9 9 9 9 *1 *2 Manager 9 9 9 9 9 9 9 9 *1 The settings can be edited on the setup menu ("User Management" ­ "User Level Setup"). ( page 66) When being logged out, the user level of "Viewer" will be applied. *2 Depending on the user level, the available operations of the setup menu varies as follows. Operator: Logout, alarm log reference, error log reference, system information reference, current recording setting display Viewer: Logout only 32 Disk management It is possible to format the built-in HDDs and restore HDD management information (list information of recorded images). Check HDD information HDD information (total disk size, used disk size, hour meter) and time and date of the latest/oldest data on the HDD can be checked as follows. Screenshot 1 Display the setup menu by pressing the SETUP button. Setup Menu System Setup Recording Setup Event Setup Display Setup Camera Control Setup Communication Setup User Management Maintenance Step 1 Move the cursor onto "Maintenance", and then press the [SET] button. Screenshot 2 The "Maintenance" window will be displayed. Maintenance Alarm Log Error Log System Information Current Recording Setting Disk Management Online User Information Factory Default Reboot System Advanced Information Step 2 Move the cursor onto "Disk Management", and then press the [SET] button. Screenshot 3 The "Disk Management" window will be displayed. Disk Management No. 1 2 3 4 5 6 Capacity Used Hour Meter 400h 389h 153h 400h Step 3 The status of the active built-in HDD will be displayed. The position where the HDD is installed will be displayed. 232. 884GB 232. 250GB 232. 250GB 232. 884GB 138. 034GB 232. 884GB 000. 008GB 232. 884GB No Disk Detected No Disk Detected [STOP]:Change HDD Information 1 2 3 4 5 6 [REC]:Start Format All Format Return Anterior view 33 Notes: · The used disk space will not be displayed as "0 GB" even when no data is saved on the disk since the system uses some of the disk space. · HDD6 is not provided for the WJ-RT416V. Capacity The total size of the HDD will be displayed. Used The used size of the HDD will be displayed. Hour Meter The hour meter of the HDD will be displayed. Note: When a HDD is in the faulty state, the indication will displayed on the "Disk Management" window as follows. No Disk Detected: Indicates that no HDD is connected. Disk Unformatted: Indicates that the HDD is not formatted with this recorder. Disk Access Error: Indicates that a HDD access error occurred. Data Error: Indicates that the directory structure of the HDD is broken. Disk Unacknowledged: Indicates that the recorder failed to mount the HDD for a reason such as data number limitation, even though the HDD is in the normal state. Disk Type Unfitting: Indicates that the model number and the disk size of the newly mounted HDD is different from the replaced HDD. Screenshot 4 The "Disk Information" window will be displayed. Disk Information Oldest HDD1:01-01-2006 10:00:00 HDD2:01-31-2006 10:00:00 HDD3:02-28-2006 10:00:00 HDD4:03-31-2006 10:00:00 HDD5: HDD6: No Data No Data Close Latest 01-31-2006 09:45:00 02-28-2006 09:45:00 03-31-2006 09:45:00 04-30-2006 09:45:00 Step 4 Move the cursor onto "Information", and then press the [SET] button. Step 5 Check time and date of the oldest data and the latest data, and then press the [SET] button. 34 Format the HDD There are two ways of how to format the HDD as follows. · Format only the selected HDD · Format all the HDDs simultaneously Format only the selected HDD Screenshot 1 Display the "Disk Management" window ( page 33). Disk Management No. 1 2 3 4 5 6 Capacity Used Hour Meter 400h 389h 153h 400h Step 1 Move the cursor onto the HDD to be formatted, and then press the [REC] button. The confirmation window will be displayed. [. . . ] · Operating instructions of the monitoring software (PDF) · Monitoring software (RT4Client) The following is for installation. Power cable for NTSC model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power cable for PAL model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HDD mounting screw, sleeve, damper for the WJ-RT416K . . . . . . . . . . . . . . . . . . . . [. . . ]