User manual PANASONIC WND300P

[. . . ] Addendum for the WJ-ND300 series Read this notice with the operating instructions. Operating the Unit for the First Time Important: When connecting an optional extension unit (the WJ-HDE300 series), turn on the power of the extension unit before turning on the power of this unit. [1] Turn on the POWER switch. The OPERATE indicator will light and the system check (checking the system and hard disk) will start. The "WJ-ND300" indication will be displayed on the LCD at startup, and the "Initializing" indication will be displayed while startup. Then, the "System Checking" indication will be displayed while checking the system. [. . . ] Select "WJ-ND300 Viewer" (the program to be deleted) from presently installed programs and click the [Change/Remove] button. The uninstall program will be launched and the wizard will be displayed. Uninstall the program by following instructions on the monitor. About the Error Log The following are the descriptions about the contents of the error log. Error Log W-ERR u-d R-ERR u-d HDu-d 1DOWN HDu 2DOWN Please Setup on DISK CONFIG MENU Disk array is changed. HDD-10 ERR RAID5 1DOWN Indication on the LCD Description Solution Failed to write/read data on the Press the ALARM RESET button to cancel the error status. If this error occurs frequently, conHDD. The HDD may be malfunction- tact the dealer to replace the HDD. After recovering/replacing the faulty disk, the error status will be canceled. Display the DISK CONFIG MENU and configure the HDD settings. Error Log SMART u-d H. METER u-d Indication on the LCD Description HDD-1-u-d ERR HDD WARNING HDD-2-u-d ERR HDD HOUR METER Solution The HDD may be malfunction- Contact the dealer to replace the HDD. The set time for the hour meter Press the ALARM RESET button to cancel the error status. If this error occurs frequently, conhas passed. It may be reaching the end of tact the dealer to replace the HDD. Data on each recording area is Contact the dealer. After replacing the faulty disk, the error status lost by the "REMOVE" error, will be canceled. [. . . ] the network camera is disconnected. LINK_ERRp *1: The HDD should be replaced by the qualified service personnel or system installers. Contact the dealer when an unlisted error occurred. Parameter u f d n cc vvv Description Unit/unit number FAN number Disk number Network port number Camera number Volume number Detail 1-4: Extension unit, 9: RAID of this unit, 0: SINGLE of this unit 1-4: FAN number (FAN1-FAN4) 1-4: Disk number (HDD1-HDD4), 5: Others (Unknown HDD) 1: Camera port, 2: Client PC port, 3: Maintenance port 01-32: Camera number NML: Normal recording area, EVT: Event recording area, CPY: Copy area NM0905-0 3TU001467AAA [. . . ]