User manual PANASONIC WRM10

[. . . ] 4 OPERATION CONDITION Use this air conditioner under the following temperature range Temperature (C) COOLING HEATING Maximum Minimum Maximum Minimum *DBT 32 16 30 16 Indoor *WBT 23 11 Outdoor *DBT *WBT 43 26 16 11 24 18 -5 -6 * DBT: Dry bulb temperature * WBT: Wet bulb temperature NOTICE: This model is not suitable for 24 hours non-stopping operation in heating mode below -5C. When the outdoor temperature is below -5C and you use this model out of above conditions, the outdoor unit might be frozen up and stop operation for protection control. 7 SAFETY PRECAUTIONS To prevent personal injury, injury to others, or property damage, please comply the following. Incorrect operation due to failure to follow instructions may cause harm or damage, the seriousness of which is classified as below: WARNING This sign warns of death or serious injury. [. . . ] After long period of use, make sure the installation rack is not deteriorate to prevent the unit from falling down. rEMOTE CONTROL Do not use rechargeable (Ni-Cd) batteries. to prevent malfunction or damage of the remote control: Remove the batteries if the unit is not going to be used for a long period of time. New batteries of the same type must be inserted following the polarity stated. POWER SUPPLY Do not pull the cord to disconnect the plug to prevent electric shock. Wires live neutral earth colours (IEC Standard) brown blue green-yellow Wiring colour may vary depending on a country wiring code's standard. This equipment must be earthed to prevent electric shock or fire. In HEAT mode, if AUTO is set, the horizontal louver fix at predetermined position. b QUI ET POWE RFUL A SEL ECT CHECK ERROR RESET RESET SET/CA NCEL AIR CON DITIO NER 6 (GREEN) (GREEN) (ORANGE) (ORANGE) (GREEN) (RED) TO ACHIEVE TEMPERATURE QUICKLY This setting enables the desired set temperature to be reached quickly. 7 TO ENJOY QUIET ENVIRONMENT Press the remote control's button 1 TO TURN ON OR OFF THE UNIT This setting provides a quiet environment by reducing the airflow noise. POWERFUL AND QUIET operations can not be activated at the same time. Button to select the delay hour for button to select the delay hour for OFF Timer. This mode of timer can only be set while the airconditioner is not in operation. TO CONFIRM THE TIMER SETTING button once to activate the timer Press the operation which will start when the set time is reached. tO CANCEL THE TIMER SETTING Press the operation. Button again to cancel the timer The timer indicator of the indoor unit will light up during the timer operation. When ON Timer is set, the unit may start earlier before the actual set time in order to achieve the desired temperature on time. If timer is cancelled manually or due to power failure, you can restore the timer again by repeating steps above (once power is resumed). 3 Press the button to select the delay hour for ON Timer. This mode of timer can only be set while the airconditioner is in operation. 11 ENGLISH INDOOR UNIT Switch off the power supply before cleaning. Do not touch the aluminium fin, sharp parts may cause injury. [. . . ] This may due to damp smell emitted by the wall, carpet, furniture or clothing. This helps to remove the surrounding odours. The delay is a protection to the unit's compressor. It is the Auto Restart function of the unit. [. . . ]