User manual PANASONIC WSAT350

[. . . ] English Notice for DVB / Data broadcasting / IPTV functions This TV is designed to meet the standards (as of August, 2011) of DVB-T / T2 (MPEG2 and MPEG4-AVC(H. Consult your local dealer for availability of DVB-T / T2 or DVB-S services in your area. Consult your cable service provider for availability of DVB-C services with this TV. This TV may not work correctly with the signal which does not meet the standards of DVB-T / T2, DVB-C or DVB-S. [. . . ] 1 2 Select DVB-S , DVB-C or DVB-T (p. 21) Display the menu and select [Setup] select Setup access 3 Select [Display Settings] select Display Settings Access access 4 Using Data Service Application Select [Data Service Application] and set to [Auto Start On] Display Settings Data Service Application Auto Start On select access / set Notification message will appear when the application is available. Note Operations may vary depending on the broadcaster. On-screen instructions may not correspond to the remote control buttons. To check the availability of the application 1 BBC ONE WALES Coronation Street 20:00 - 20:55 Now Info 20:35 All DVB-T Channels Change category "D" is displayed if programme has Hybrid Broadcast Broadband TV application To stop the application 62 Using Common Interface The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. This function may not be available in some countries or regions. video and audio signals may not be output depending on broadcasts or services. Although CI module may enable you to view some services, this TV does not guarantee all services (e. Please use only the approved CI module by the broadcaster. Consult your local Panasonic dealer or broadcasters for more information and conditions of the services. Caution Turn off Mains power On / Off switch whenever inserting or removing the CI module. In this case, the schedule information (the date that the new version can be used) will appear. The update will not start when the TV is off. 65 Multi Window Enjoy viewing the digital TV programme and external input (AV , Component or HDMI) at once. 1 Display the menu and select [Picture] select Picture access 2 Select [Picture in Picture] select Picture in Picture Access access 1 DVB-T Remote control operations apply to the main screen. Main screen AV1 EXIT PandP Swap Sub screen How to operate in multi window Display the colour bar if it is not displayed Picture-in-Picture mode [PinP] 1 DVB-T Picture-and-Picture mode [PandP] 1 DVB-T AV1 (yellow) Multi Window AV1 AV1 (green) EXIT PinP Swap EXIT PandP Swap (blue) To exit multi window (red) To change the input mode or channel of sub screen 1 Swap sub screen 2 Change the input mode for main screen 1 DVB-T 3 Swap again (blue) (blue) or channel by the remote control (p. 21, 30) EXIT PandP Swap Swap Colour bar Note Each input mode can only be displayed either on main screen or sub screen. The sound comes from only the main screen in multi window. You cannot change the aspect ratio in multi window. hDMI is available only for main screen. Some signals are reformatted for suitable viewing on your display. 66 Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. [. . . ] If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device's ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade. [. . . ]