User manual PANASONIC WV-7015

[. . . ] Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. !1 y u q Camera Panel w Pan/Tilt/Azimuth Table Adjusts the panning/tilting and azimuth angle of the camera. e Focus Lever Fixes the focus position after adjusting. r Zoom Lever Fixes the zoom position after adjusting. mini jack) For connecting an LCD monitor to adjust the camera images. [. . . ] !1 Panel Cover SA 1966 WARNING: · This apparatus must be earthed. · To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture. · The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus. · All work related to the installation of this product should be made by qualified service personnel or system installers. PREFACE The WV-7015 is a 1/4-inch CCD color camera designed for use in video surveillance systems. The camera features a high picture quality thanks to the use of digital signal processing LSIs, and easy mounting on the ceiling or wall. INSTALLATION I Installation Plans & Preparations The camera can be installed on a junction box or directly on the wall/ceiling. Preparations · When planning to use a junction box, procure one locally that meets the dimensions in the figure. · When directly mounting on the wall/ceiling, prepare a space which is ø135 mm {ø55/16"} or larger. Cable route · When using a junction box, cables will go behind the junction box via the cable access hole on the camera panel. · When directly mounting on the wall/ceiling, you need to cut out the panel cover to make a sideway exit for cables. PRECAUTIONS 1. This product should be installed and connected by qualified service personnel or system installers in conformity with NEC. Use a class 2 power source supplying 12 V DC or 24 V AC. · The video output to the BNC will be interrupted while an adjusting monitor is connected to the video jack. Connect an adjusting monitor to the video jack. Pan/tilt/azimuth adjustment · Pan and tilt the table to aim the camera at what you need to watch. · Turn the azimuth adjuster to obtain a level image. Tilt Focus lever (with lock function) Zoom lever (with lock function) 3. Assemble the camera in the opposite order of "Disassembly of the camera" described earlier. · Attach the inner dome to the camera. · Attach the panel cover to the camera so that the two position marks overlap. Fill the screw hole with the supplied rubber cap. To mount the camera on a junction box 1. Install the junction box on the wall/ceiling. Attach the four screws to the junction box. Hook the camera to the four screws, and turn it clockwise. [. . . ] Lock the lever. Shown figure is an example for junction box. 46 mm {1-13/16"} Use screws suitable for the installation surface and structure. 83, 5 mm {3-5/16"} SPECIFICATIONS Pick-up device: Scanning area: Synchronization: Camera mounting screw x 4 (not supplied) CONNECTIONS I Video Output Connection Connect the video output connector to the monitor or other system device with the procured coaxial cable. The maximum extensible length is shown in the table. Type of coaxial cable Recommended (m) maximum cable length (ft) RG-59/U RG-6/U RG-11/U RG-15/U (3C-2V) (5C-2V) (7C-2V) (10C-2V) G Cable Length and Wire Gauge 24 V AC The recommended cable length and thickness are shown in the table for reference. The voltage supplied to the power terminals of the camera should be within 19. 5 V AC and 28 V AC. Recommended wire gauge for 24 V AC line. 250 825 500 1 650 600 1 980 800 2 640 Copper wire size (AWG) Length of (m) Cable (Approx. ) (ft) #24 (0. 22 mm2) 95 314 #22 (0. 33 mm2) 150 495 #20 (0. 52 mm2) 255 842 #18 (0. 83 mm2) 425 1 403 Scanning system: Scanning: Horizontal: Vertical: Horizontal resolution: Video output: Automatic Gain Control (AGC): Automatic Tracing White Balance (ATW): Signal-to-noise ratio: Minimum illumination: Back Light Compensation (BLC): Detail: Lens: Focal length: F number: Panning range: Tilting range: Azimuth range: Ambient operating temperature: Ambient operating humidity: Power source and power consumption: Dimensions: Weights: I Power Connection Connect the power source to the 3-wire pigtail sticking out from the camera, using the procured power cable. 768 (H) x 492 (V) pixels, interline transfer CCD 3. 6 (H) x 2. 7 (V) mm (equivalent to scanning area of 1/4" pick-up tube) Internal, Line-lock (24 V AC only) or multiplexed vertical drive (VD2) 2 : 1 interlace 525 lines / 60 fields / 30 frames 15. 734 kHz 59. 94 Hz 480 TV lines 1. 0 V[P-P] NTSC composite 75 /BNC conector +18 dB ON only 50 dB (equivalent to AGC Off, weight On) 1. 6 lx {0. 16 foot-candle} at F1. 4 (WIDE) On or Off Sharp or Soft, selectable 2x variable focal lens f=2. 8 - 5. 8 mm F1. 4 - 1. 9, close ±100 ° ±75 ° ±100 ° ­10 °C to +50 °C {14 °F to 122 °F} Less than 90 % 12 V DC, 235 mA 24 V AC 60 Hz, 2. 8 W ø135 mm x 90 mm (H) {ø 5-5/16" x 3-9/16" (H)} 0. 46 kg {1. 01 lbs. } G Wire Colors & Functions 12 V DC Use the formula below to calculate the power cable and power supply. [. . . ]