User manual PANASONIC WV-BP124

[. . . ] Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Caution: To assure continued compliance, (example use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. For Canada SA 1965 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This Class A digital apparatus complies with Canadian ICES-003. The serial number of this product may be found on the top of the unit. [. . . ] 4-2 The cursor moves to OK after all the three digits have been entered. Press the CAM (SET) key to move the cursor to the first digit on the second line. 4-3 Enter the same password as the one you have entered on the first line. If the new password is successfully entered, the screen returns to SET UP MENU. If the first entry for the password is different from the second one, the screen returns to the NEW PASSWORD?4-6 To return to the SET UP MENU menu without changing the password, move the cursor to RET, and press the CAM (SET) key. I Special 1 Menu Setting (SPECIAL 1) G Privacy Zone (PRIVACY ZONE) Up to 8 unwanted zones can be masked on the monitor screen. Move the cursor to PRIVACY ZONE and select ON or OFF with the joystick. Press the CAM (SET) key to display the ZONE NUMBER setting menu. ** SPECIAL PRIVACY ZONE PROPO. P/T AREA TITLE PATROL ALARM IN/OUT CLEANING EL-ZOOM PRESET ALM IMAGE HOLD TILT ANGLE RET 1 ** OFF ON ON(USER) STOP OFF ON OFF OFF 0° · The privacy zone may appear on the monitor screen depending on the direction of the camera. · The privacy zone function will not work at start-up immediately after turning the power on. To register a new zone 3-1 For PAN/TILT, move the cursor to PUSH SET and press the CAM (SET) key. ** ZONE NUMBER 3*/8 ** PAN/TILT PUSH SET ZOOM/FOCUS PUSH SET ZONE SCALE SET DEL RET ····|···· L H 3-2 Adjust the pan and tilt position so that the desired position comes into the zone frame with the joystick. ** ZONE NUMBER 3*/8 ** PAN/TILT PUSH SET ZOOM/FOCUS PUSH SET U TILT D/L PAN R ** ZONE NUMBER 1*/8 ** RET ON: Preset privacy zones are veiled on the monitor screen. OFF: The veiling function does not work. OFF: The speed is constant at the fastest level regardless of the zoom ratio. Turn the camera north with the joystick, and press the CAM (SET) key. The origin of the direction (North) is set. Note: Area titles are highlighted until the origin is set. 3. Move the cursor to PUSH SET for ZOOM/FOCUS, and press the CAM (SET) key. ZOOM/FOCUS is highlighted and "U ZOOM D/L FOCUS R" appears. ** DIRECTION(NESW) PAN/TILT PUSH ZOOM/FOCUS PUSH POSI U ZOOM D/L FOCUS + N ** SET SET R ** AREA TITLE(USER) ** 1* NORTH 2 3 EAST 4 SOUTH-EAST 5 SOUTH 6 SOUTH-WEST 7 8 NORTH-WEST RET RESET RET 4. Adjust the zoom or focus with the joystick. Move the cursor to POSI O, and press the CAM (SET) key. The area title position appears on the monitor screen. If needed, change the display position with the joystick, and press the MON (ESC) key. An area title always appears under the camera ID. [. . . ] 0. 1 °/s - 120 °/s 8-steps/64-steps sequence position : maximum approx. 300 °/s 0 ° to 180 ° (­5 ° to 185 ° at 5 ° tilt angle setting) manual/sequential position/sort position manual : approx. 8-steps/64-steps sequential position : maximum approx. 300 °/s pan/tilt, lens, 64 preset positions, home position Weights and dimensions indicated are approximate. [. . . ]