User manual PANASONIC WV-BP510

[. . . ] Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Caution: To assure continued compliance, (example use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. SA 1965 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. SA 1966 The serial number of this product may be found on the bottom of the unit. [. . . ] Select a system unit, monitor, and desired camera. Move the zoom wheel controller (located at the top of 3D joystick). · Turning the zoom wheel controller to the right will zoom the image. (The zooming level will go up. ) · Turning the controller to the left will widen the scene. (The zooming level will go down. ) WIDE TELE I Lens Focus Control The following procedure is available when a selected camera has a lens whose focus is adjustable. Select a system unit, monitor, and desired camera. Adjust the lens focus by pressing the FOCUS NEAR and FAR buttons of 3D joystick unit. · Pressing the FOCUS NEAR will bring the focus nearer to the object. · Pressing the FOCUS FAR will bring the focus farther from the object. To adjust the lens focus automatically Zoom wheel controller Note: Available zooming rates differ depending on the motorized zoom lens. Press the B button of main unit or top button of 3D joystick unit. The lens focus will be adjusted automatically for the object displayed when you pressed the button. Note: As the factory default, auto focus has been assigned to the B button and top button. The associated camera function will be activated. Note: If you assign camera functions to the joystick function buttons (A, B, and top buttons), you can recall the camera functions by pressing these buttons. 57 MENU FUNCTION DESCRIPTIONS for details. Mon01 Cam001 Memory Pre012 Note: If the registration have failed, "Invalid" will appear on the LCD. (Example: When the selected camera does not support preset position control) Mon01 Cam001 Pre012 Invalid 51 I Camera Position Control Camera position is the association of camera numbers and preset position numbers. Up to 1 000 camera positions are registrable in the system, and you can move a desired camera to a desired preset position only by entering a camera position number. Note: To activate this function, preset positions and camera positions need to be registered. 76 Camera Position Registration or Clearing. ) 1. Enter a camera position number by pressing the numeric buttons. The entered number will appear on the LCD. Mon02 Cam128 F1 F2 F3 HD316 F4 Mon02 Cam003 F1 F2 F3 HD316 F4 Mon02 Cam001 F1 F2 F3 HD316 F4 Mon01 Cam001 F1 F2 F3 ___11 F4 2. To return to the camera image more recently selected, press the + button while holding down the HISTORY button. The camera image more recently selected will be displayed on the monitor. [. . . ] 25. You cannot activate any functions even when pressing the function buttons (F1 to F4/F5 to F8). Refer to pp. 72 to 76. When pressing one of the function buttons (F1 to F4/F5 to F8), there is a difference between the function displayed on the LCD and that recalled actually. Function assignment settings of the F1 to F8 buttons may be wrong. 63 and 64. The LCD title may have been edited wrongly. There is an invalid button even when it is pressed. [. . . ]