User manual PANASONIC WV-BP514

[. . . ] · Wipe the bracket regularly using a soft and dry cloth, or a cloth moistened with a water solution of an ordinary kitchen detergent. · Do not use chemicals for cleaning the enclosure as it may damage the surface. · All the necessary steps required for installing this product must be taken by a qualified service person or system installer. [. . . ] · Be sure to use the aniti-fall wire. · Do not use this branket with any equipment other than the WV-CS950 and the WV-CS954. · Follow all applicable local and national electrical, fire and safety codes when installing the camera with this ceiling mount bracket. The model numbers in this Operating Instructions are shown without suffix. 4 Installing the Mounting board. For suspended ceilings Align it with the hole in the ceiling and lay it across the two C-beams. For structurally strong ceilings Align it with the hole in the ceiling and attach it. 5 Remove the Mounting Screw (M3, provided), pull up the Camera Mounting Base off the camera, and turn the camera counterclockwise. Mounting Screw Rotate 15° Remove the Camera Mounting Base by pulling up. 6 Remove the two Lock Lug Fixing Screws and replace the Lock Lug with L-type. Retighten the two Lock Lug Fixing Screws (refer to the right figure). Lock Lug Fixing Screws Lock Lug Lock Lug Fixing Screws L-type Base Lug (provided) 7 Remove the two Lock Lug Fixing Screws and replace the Lock Lug with L-type. Retighten the two Lock Lug Fixing Screws (refer to the right figure). Lock Lug Fixing Screws 13 Attach the Fall Prevention Clip (provided) to the anchor bolt. Wrench for Hexagon Socket Head Screw. . . . . . . 1 pc. Nut (M4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 pcs. Screw (M3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 pcs. Screw (M4-L8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 pcs. Template. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc. Heat Insulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc. 12 Place the Decoration Cover for the bracket on the camera. Then, pull up the Slot Masking Cover (provided). Decoration Cover For European and other fields: Matsushita Electric Industrial Co. , Ltd. [. . . ] Heat Insulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc. 12 Place the Decoration Cover for the bracket on the camera. Then, pull up the Slot Masking Cover (provided). Decoration Cover For European and other fields: Matsushita Electric Industrial Co. , Ltd. Osaka, Japan http://www. panasonic. co. jp/global/ For U. S. [. . . ]