User manual PANASONIC WV-BP70

[. . . ] 3 Monitoring Images on a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Monitor images from a single camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Monitor images from multiple cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Action at an Alarm Occurrence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Default: OFF Important: Before configuring the host authentication, it is necessary to register IP addresses of the PCs to be allowed to access the camera and determine their access levels. If "ON" is selected for "Host authentication" before registering the hosts (IP addresses), it will be impossible to access the camera. [IP Address] Enter the IP address of the PC to be allowed to access the camera. Notes: · When "IP address/subnet mask" is entered, it is possible to restrict PCs in each subnet. · When the IP address already in use is entered and the [REG] button is clicked, the respective host information will be overwritten. [Access level] Select the access level of the host from the following. Live only Refer to page 35 for further information about the access level. Live only 36 Configure the settings of the servers [Server setup] The settings relating to the mail server and the FTP server can be configured on this page. The "Server setup" page has 2 tabs of the [Mail] tab and the [FTP] tab. Configure the settings relating to the mail server [Mail] Click the [Mail] tab on the "Server setup" page. The settings relating to the mail server used to send the alarm mail can be configured on this page. [Authentication] Select the authentication method to send e-mails from the following. Contact the network administrator or your Internet service provider. · IP address · Net mask · Default gateway (when using the gateway server/router) · HTTP port · Primary DNS, Secondary DNS (when using DNS) <Unavailable IP addresses> 0. *. *. * *. *. *. 0 255. *. *. * *. *. *. 255 127. 0. 0. 1 Class D address (224. 0. 0. 0 - 239. 255. 255. 255) Class E address (240. 0. 0. 0 - 255. 255. 255. 255) [Net mask] When not using the DHCP function, enter the net mask of the camera. Default: 255. 255. 255. 0 [DHCP] Select "ON" or "OFF" to determine whether or not to use the DHCP function. Default: OFF [IP address] When not using the DHCP function, enter the IP address of the camera. Do not enter the IP address already in use (for the PCs and the other network cameras). Default: 192. 168. 0. 10 [Default gateway] When not using the DHCP function, enter the default gateway of the camera. Default: 192. 168. 0. 1 <Unavailable IP addresses for the default gateway> 0. *. *. * *. *. *. 0 255. *. *. * *. *. *. 255 127. 0. 0. 1 Class D address (224. 0. 0. 0 - 239. 255. 255. 255) Class E address (240. 0. 0. 0 - 255. 255. 255. 255) 39 [HTTP port] Assign the port numbers independently. The following port numbers are unavailable since they are already in use. Available port number: 1 - 65535 Default: 80 <Port numbers already in use> 20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 995, 10669, 10670 [DNS] Select "AUTO" or "MANUAL" to determine whether or not to use the DNS. When "MANUAL" is selected, it is necessary to configure the settings for the DNS. When using the DHCP function, it is possible to obtain the DNS address automatically by selecting "AUTO". [. . . ] It is recommended to use Internet Explorer 6. 0 SP2. · Depending on the traffic of the network or the concentration of access to the camera, there might be difficulties displaying the camera picture. Click the reload button of the browser to request the camera picture to be refreshed. · Is the SD memory card inserted correctly? Operating instructions (book) ­ Operating instructions (book) 21 Images cannot be saved on the SD memory card. · Is the SD memory card formatted? [. . . ]