User manual PANASONIC WV-CM1020

[. . . ] or the BSI mark on the body of the Check for the ASTA mark fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN H G CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. [. . . ] · Looped through BNC connectors for video inputs and outputs. · Operations controlled by moving the cursor in the setup menu. · Automatic frequency control activated from setup menu. · Looped through RCA connectors for audio input and output. · For mounting in optional 19" rack with adapter WVQ52AE (up to two monitors). PRECAUTIONS · Do not block the ventilation slots. · Place the video monitor at least 5 cm (2 inches) apart from the wall. · Do not expose the monitor to water or moisture. · Do not operate the monitor if it becomes wet. · Take immediate action if ever the monitor becomes wet. Turn power off and refer servicing to qualified service personnel. Moisture can damage the monitor and also create the danger of electric shock. · Do not drop metallic parts through slots. This action could permanently damage the monitor. Turn power off immediately and refer servicing to qualified service personnel. · Do not attempt to disassemble the monitor. To prevent electric shock, do not remove screws or cover. There are no user serviceable parts inside. Refer servicing to qualified service personnel. · Do not use the monitor beyond its temperature, humidity or power source ratings. a) Ambient temperature must not range beyond ­10°C - +50°C (14°F ­ 122°F). [. . . ] Wiring Precautions: · Do not bend a coaxial cable into a curve whose radius is smaller than 10 times its diameter. RG-59U (3C-2V) Recommended 250 m maximum (825 ft) cable length Cable RG-6/U (5C-2V) 500 m RG-11/U RG-15/U (7C-2V) (10C-2V) 600 m 800 m (1 650 ft) (1 980 ft) (2 650 ft) INSTALLATIONS s Mounting in the Rack This monitor can be mounted in the rack as shown in the figure. For more information, refer to the instructions of the Rack Mount Bracket WV-Q52AE. POWER ON OFF INPUT A B MENU ­AUDIO+ Video Monitor WV-CM Rack Mount Screws (Not provided) 6 SYSTEM CONNECTION s Single Monitor Connection q Connecting Cameras Camera VIDEO OUT · Monitoring the Playback picture Connect the Video Input terminal A or B of the monitor to the Video Output Connector of the VTR with a 75ohm coaxial cable. · Monitoring the sound Connect the Audio Out Terminal of VTR to the Audio Input Connector of the monitor. q Multiple Monitor Connection Camera VIDEO OUT FOCUS VIDEO B IN VIDEO A IN AUDIO IN AC IN Monitor (1) Camera VIDEO OUT OUT OUT OUT 1. Connect the Video Output terminal of the camera to the Video Input Connector A or B of the monitor with a 75ohm coaxial cable. [. . . ]