User manual PANASONIC WV-CP234P

[. . . ] Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument, eller andra normativa dokument som framstölls i Direktiv 73/23/EEC och 89/336/EEC. Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivien 73/23/EEC ia 89/336/EEC. Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som fælger bestemmelsene i direktiven 73/23/EEC og 89/336/EEC. For U. K. FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. [. . . ] Dwell time changes as follows: 2S 3S 5S 10S 30S 1MIN 2MIN 3MIN 4MIN Preset setting menu PRESET NO. 15*H POSITION SET PRESET ID ALC/MANUAL DWELL TIME SCENE FILE ON ALC 2S 1 The letter S signifies second(s) and MIN minute(s). RET DEL q Scene File Setting 1. To set a scene file number Move the cursor to SCENE FILE and select a scene file number (1 to 10, or OFF) by moving the joystick to the left or right. No scene file is selected at OFF. Preset setting menu PRESET NO. 15*H POSITION SET PRESET ID ALC/MANUAL DWELL TIME SCENE FILE ON ALC 2S 1 RET DEL 2. To set scene file details Move the cursor to a scene file number and press the CAM (SET) key. Shutter speed: Page 23 AGC: Page 23 Electronic sensitivity enhancement: Page 23 White balance: Page 25 Motion detector: Page 27 Auto focus: Page 28 Scene file setting menu * * SCENE FILE 1 ** SHUTTER AGC SENS UP WHITE BAL MOTION DET AF MODE RET OFF ON OFF ATW ON MANUAL q To return to the PRESET NUMBER SET Menu · Move the cursor to RET and press the CAM (SET) key. The PRESET NUMBER SET menu appears with the * mark on the right of the preset position number. Preset setting menu PRESET NO. 15*H POSITION SET PRESET ID ALC/MANUAL DWELL TIME SCENE FILE ON ALC 2S 1 RET DEL q To return to the setup menu · Move the cursor to RET and press the CAM (SET) key. PRESET NUMBER SET menu * PRESET NUMBER SET * 1* 5* 9* 13* 17 21 25 29 ID: 33-64 2* 6* 10* 14* 18 22 26 30 RET 3* 7* 11* 15*H 19 23 27 31 4* 8* 12* 16 20* 24 28 32 - 16 - s Deleting Preset Positions 1. Move the cursor to PRESET 1* and select the position number to be deleted by moving the joystick. Setup menu *** SET UP MENU *** PRESET 1* MAP HOME POSITION SELF RETURN AUTO MODE FLIP-A-CHIP LOCAL/REMOTE CAMERA 15 10MIN AUTO PAN ON LOCAL 2. Press the CAM (SET) key to display the preset setting menu. Preset setting menu PRESET NO. 15*H POSITION SET PRESET ID ALC/MANUAL DWELL TIME SCENE FILE RET DEL ON ALC 2S 1 3. Move the cursor to DEL and press the CAM (SET) key. This deletes the preset position and the PRESET NUMBER SET menu appears. The * mark on the right of the position disappears. ON: The camera pans from the start position to the end position, then keeps rotating in the same direction to return to the start position. OFF: The camera pans from the start position to the end position, then rotates backward to the start position. This movement is repeated over and over. To set a dwell time Move the cursor to DWELL TIME and select a dwell time by moving the joystick to the left or right. Dwell time changes as follows: 0S 30S 1S 20S 2S 10S 3S 5S ** AUTO PAN ** POSITION SET SPEED ENDLESS DWELL TIME RET START END . . . I. . . . L H ON 1S ** AUTO PAN ** POSITION SET SPEED ENDLESS DWELL TIME RET START END . . . I. . . . L H ON 1S Notes: · When the panning, tilting, lens zoom or focus operation is controlled manually, the Auto mode function should be canceled. To activate Auto mode, select AUTO MODE ON again. · When 0S is selected, the camera stops without dwelling and starts. s FLIP-A-CHIP Setting · Move the cursor to FLIP-A-CHIP, and move the joystick to the left or right to set FLIP-A-CHIP to ON or OFF. When the joystick is kept pressed down to move the camera to the bottom end, the camera moves to the bottom end of the range and stops. When FLIP-A-CHIP ON is selected, the camera automatically rotates 180° at the bottom end, and starts moving upward. [. . . ] Top cable exit Push the decoration cover against the camera mounting angle. 6. Tighten the camera fixing screw with a screwdriver. - 33 - When using the optional bracket for mounting refer to the Operating instruction for the WV-Q105, WV-Q106, WV-Q107 or WV-Q108. CONNECTIONS Precaution: The following connections should be made by qualified service personnel or system installers in accordance with all local codes. 220 - 240V AC (WV-CP234P, WV-CSR650) 24V AC (WV-CS654) Data cable (Only for WV-CSR650) RS485 cable Video Output Cable BNC Plug Coaxial Cable (5C-2V) To Video IN (CAMERA IN) BNC Plug T The coaxial cable length (RG-6/U, 5C-2V) for the connection is up to 1 200 meter (4, 000 ft. ) Note: When powered up, the unit performs a self-check (including one panning, tilting, zooming and focusing operation). q Power supply connection Recommended wire gauge sizes for 24V AC line Copper wire size (AWG) Length of Cable (Approx. ) (m) (ft) #20 #18 #24 #22 (0. 22mm2) (0. 33mm2) (0. 52mm2) (0. 83mm2) 20 65 30 100 45 160 75 260 Accessory Connector Information Pin No. 1: 2: 3: 4: Power Source 24 V AC LIVE 24 V AC NEUTRAL Ground Not use Prepare the individual conductors for clamping. Use MOLEX band tool part number 57027-5000 (for UL-Style Cable UL1015) or 57026-5000 (for UL-Style UL1007) for clamping the contacts. [. . . ]