User manual PANASONIC WV-CP470

[. . . ] Colour CCTV Cameras WV -CP 470 Operating Instructions Model No. WV-CP470 WV-CP474E (Lens: Option) Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. N0102-1042 V8QA5955BN Printed in Japan N 19 CP4 70 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som fælger bestemmelsene i direktiven 73/23/ EEC og 89/336/EEC. Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatiefve dokumenten, overeenkomstig de bepalingen van Richtlijnen 73/23/ EEC en 89/336/EEC. Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i overensstemmelse med den følgende standarder eller andre normative dokumenter i følge bestemmelserne i direktivene 73/23/ EEC og 89/336/EEC. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is interned to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Move the cursor to MASK SET and press I. The 48 mask areas appear on the monitor screen. The cursor is blinking in the upper left corner of the screen. RET Blinking 3. Move the cursor to the area where backlight is bright and press I to mask that area. (When the cursor is moved on an area that has already been masked, the mask and cursor start blinking. ) Blinking 4. To cancel masking, move the cursor to that area and press I. After masking is completed, press I for 2 seconds or more. If you want to change the video output level (picture contrast), move the "I" cursor for LEVEL and adjust the level. Note: If ON is selected for SUPER-D2, a shadow (black line) may appear at the boundary between the bright and the dim scene. This is a natural phenomenon and does not indicate trouble. Turns to white Blinking 3. Shutter Speed Setting (SHUTTER) Note: When ELC is selected for ALC/ELC on the CAM SET UP menu or ON is selected for SUPER-D2 on the ALC CONT menu, this item is not available. To select electronic shutter speed, select OFF for SUPER-D2 in the ALC CONT menu. Move the cursor to SHUTTER and select the electronic shutter speed. The preset values for SHUTTER (electronic shutter speed) change by pressing L or M as follows: OFF (1/50) 1/120 1/250 1/500 The factory default setting is ---. 1/10000 1/4000 1/2000 1/1000 4. Gain Control Setting (AGC ON (DNR-H, DNR-L)/OFF) AGC (Automatic Gain Control) automatically controls the gain (an image brightness level). Move the cursor to AGC and select automatic level adjustment ON (DNR-H), ON (DNR-L), or OFF. The factory default setting is ON (DNR-H). ON (DNR-H): This setting raises the gain and brightens the image under low light conditions. ON (DNR-L): This setting reduces an afterimage sometimes caused by a moving object when ON (DNR-H) is activated. OFF: This setting does not control the gain. Notes: · When ON (DNR-L) is selected, noise can slightly increase than ON (DNR-H). · DNR-H and DNR-L do not appear on the system status display of the connected equipment. 5. [. . . ] While observing the waveform monitor or colour video monitor, move the "I" cursor to adjust the aperture gain level. 10-4. While observing the waveform monitor or colour video monitor, move the "I" cursor to adjust the pedestal level (black level). 10-5 BW This function lets you automatically switch from colour to black-and-white pictures in low light conditions such as at night. Select AUTO1, AUTO2, EXT, ON or OFF using L or M. AUTO1: The camera selects black and white mode if the picture is dark, or colour mode if the picture is bright enough. [. . . ]