User manual PANASONIC WV-CS400

[. . . ] Combination Camera WV-CS400 Before attempting to connect or operate this product, please read these instructions completely ENGLISH VERSION We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336. Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta conforme ai seguenti standard o altri documenti normativi conformi alle disposizioni delle direttive CEE/73/23 e CEE/89/336. For Australia Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatiefve dokumenten, overeenkomstig de bepalingen van Richtlijnen 73/23/EEC en 89/336/EEC. Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i overensstemmelse med den følgende standarder eller andre normative dokumenter i følge bestemmelserne i direktivene 73/23/EEC og 89/336/EEC. Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument, eller andra normativa dokument som framstölls i Direktiv 73/23/EEC och 89/336/EEC. [. . . ] · Move the cursor to the "ALC/MANUAL" mode position and select the "ALC" mode by using the Joystick. Backlight compensation menu * ALC CONT * BACK LIGHT COMP PRESET MASK SET * LEVEL RET . . . . I. . . . - + OFF * ALC CONT * BACK LIGHT COMP PRESET MASK SET * LEVEL RET . . . . I. . . . - + OFF - 12 - (1)-1 ALC Mode with Preset Mode (PRESET ON) · Move the cursor to the "PRESET" mode position and select the "ON" mode by using the Joystick. The preset mode menu is displayed on the monitor screen as shown. · Move the cursor to "RET" position by using the Joystick and press the CAM (SET) Button to return to the Set Up menu. Blinking Blinking Turns to white Blinking B (1)-2 ALC Mode with Field Setup Mode (PRESET OFF) · Move the cursor to the "PRESET" mode position and select the "OFF" mode by using the Joystick. · The field setup menu is displayed on the monitor screen as shown. · Move the cursor to the "MASK SET" mode position and press the CAM (SET) Button. The 48 Mask Areas appears on the monitor screen. The left top area has a blinking cursor. · To mask this area, press the CAM (SET) Button. The mask and the cursor start blinking alternately. * ALC CONT * BACK LIGHT COMP PRESET MASK SET * LEVEL RET . . . . I. . . . - + OFF · To mask other areas, move the cursor to the desired area by using the Joystick. Then press the CAM (SET) Button to mask that area. · When the cursor is moved to an area that has already been masked, the mask and cursor start blinking alternately. · Press the CAM (SET) Button if this masking for this area is to be canceled. · Press the F2 Button of WV-CU550A when all masking areas are to be canceled. · After masking is completed, press the CAM (SET) Button for more than 2 seconds. The 48 Mask Areas on the monitor screen disappear and the field setup menu is then displayed. · If the video output level (picture contrast) is to be changed, move the cursor to the "LEVEL" mode position and control the Joystick to adjust the iris of the ALC lens. When the cursor is moved in the right (+) direction, the lens iris is opened wider, causing the video output level to rise. If the cursor is moved in the left (-) direction the reverse takes place. · Move the cursor to "RET" position by using the Joystick and press the CAM (SET) Button to return to the Set Up menu. * ALC CONT * BACK LIGHT COMP PRESET MASK SET * LEVEL RET . . . . I. . . . [. . . ] Hang the Fall Prevention Wire to the Camera Mounting Angle. 6. Tighten the Camera Fixing Screw with the screwdriver. Do mount the camera and Camera Mounting Angle completely as shown in the following. When removing the camera from the Camera Mounting Angle, loosen and press up the Camera Fixing Screw (M3) by using the screwdriver. Be sure to match the wire with the Fall Prevention Wire Fixing Angle as shown below. Fall Prevention Wire Fixing Angle 7. [. . . ]