User manual PANASONIC WV-CS564

[. . . ] Color CCTV Camera Operating Instructions Model No. WV-CS564 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ENGLISH VERSION For U. S. A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] ON: The camera pans from the starting point to the endpoint, and keeps rotating in the same direction to return to the starting point. Set PAN LIMIT to OFF before ENDLESS is set to ON. OFF: The camera pans from the starting point to the endpoint, and rotates backward to the starting point. This movement is repeated over and over. To set a dwell time Move the cursor to DWELL TIME and select a dwell time by moving the joystick to the right or left. Dwell time changes as follows: 0S 30S 1S 20S 2S 10S 3S 5S Self-end range of pan limit ** AUTO PAN ** POSITION SPEED PAN LIMIT ENDLESS DWELL TIME RET START END ····|···· L H OFF ON 1S ** AUTO PAN ** POSITION SPEED PAN LIMIT ENDLESS DWELL TIME START END ····|···· L H OFF OFF 1S Notes: · When the panning, tilting, zooming or focusing in the SEQ, SORT or PATROL mode is controlled manually, the Auto mode function should be cancelled. To activate the auto mode, select the desired auto mode again or set a time for SELF RETURN in the SET UP menu. · When 0S is selected, the camera stops without dwelling and starts. · Auto refreshing may be activated during the patrol play or the auto mode to calibrate the lens position. RET 24 s Auto Pan Key Setting (AUTO PAN KEY) This is used for assigning one of the following auto functions to the AUTO key on the controller. Pressing the AUTO key activates the assigned function after this setting. · Move the cursor to AUTO PAN KEY and select an auto function by moving the joystick to the right or left. The factory default setting is AUTO PAN. Mode changes as follows: AUTO PAN SEQ PATROL SORT Setup menu ** SET UP MENU ** PRESET 1 MAP HOME POSITION OFF OFF SELF RETURN OFF AUTO MODE AUTO PAN KEY AUTO PAN LOCAL/REMOTE LOCAL PATROL STOP CLEANING OFF CAMERA RS485 SET UP AUTO PAN: assigns auto panning function to the key. SEQ: assigns the sequence function to the key. SORT: assigns the sort function to the key. PATROL: assigns the patrol play function to the key. Note: Auto pan LED on the controller does not light if a function other than the auto pan function is assigned. The auto pan function does not stop with the AUTO PAN key. s Local/Remote Setting (LOCAL/REMOTE) · Move the cursor to LOCAL/REMOTE, and move the joystick to the right or left. You can toggle between LOCAL and REMOTE. Note: The REMOTE does not work when the WV-RM70, WVCU360, WV-CU161, WJ-FS616 or WV-CU550 series is connected. Make sure that LOCAL is selected in this case. Setup menu ** SET UP MENU ** PRESET 1 MAP HOME POSITION OFF OFF SELF RETURN OFF AUTO MODE AUTO PAN KEY AUTO PAN LOCAL/REMOTE LOCAL PATROL STOP CLEANING OFF CAMERA RS485 SET UP 25 s Patrol Learn and Patrol Play (PATROL) A routine of manual operations can be stored for 30 seconds at the maximum and reproduced repetitively. Set the following parameters for the patrol learn starting position. [. . . ] 64 cameras Personal computer RS-232C port Alarm inputs Matrix switcher VCRs (up to 16) Printer System status monitor Monitors (up to 16) ALARM BUSY ALARM BUSY ALARM BUSY ALARM BUSY F1 F2 F3 F4 UP ACK RESET LEFT RIGHT BACK FORWARD SEQ SEQ ALT F1 F2 F3 F4 UP ACK RESET LEFT RIGHT BACK FORWARD SEQ SEQ ALT F1 F2 F3 F4 UP ACK RESET LEFT RIGHT BACK FORWARD SEQ SEQ ALT F1 F2 F3 F4 UP ACK RESET BACK FORWARD SEQ SEQ ALT 1 4 2 5 8 3 6 PRESET IRIS CLOSE OPEN 1 4 2 5 8 3 6 PRESET IRIS CLOSE OPEN 1 4 2 5 8 3 6 PRESET IRIS CLOSE OPEN 1 4 2 5 8 3 6 PRESET IRIS CLOSE OPEN LEFT RIGHT AF AUX 1 2 DEC INC ­1CAM +1CAM STOP AF FOCUS NEAR DOWN AUX 1 2 DEC INC ­1CAM +1CAM STOP AF FOCUS NEAR DOWN AUX 1 2 DEC INC ­1CAM +1CAM STOP AF FOCUS NEAR DOWN AUX 1 2 DEC INC ­1CAM +1CAM STOP 7 MON ESC 9 CAM SET ZOOM TELE 7 MON 9 CAM SET ZOOM TELE 7 MON 9 CAM SET ZOOM TELE 7 MON 9 CAM SET ZOOM TELE FOCUS NEAR DOWN 0 0 0 0 WIDE FAR System Controller WV-CU 550B 550 ESC WIDE FAR System Controller WV-CU 550B 550 ESC WIDE FAR System Controller WV-CU 550B 550 ESC WIDE FAR System Controller WV-CU 550B 550 System controller Note: When any peripheral is turned off and turned on again, the camera is also turned off and turned back on. 50 PREVENTION OF BLOOMING AND SMEAR When the camera is aimed at a bright light, such as a spotlight, or a surface that reflects bright light, smear or blooming may appear. Therefore, the camera should be operated carefully in the vicinity of extremely bright objects to avoid smear or blooming. ; ; ; ; ; ; Smear Bright object SPECIFICATIONS Effective pixels Scanning area Synchronization Horizontal scanning frequency Vertical scanning frequency Video output Horizontal resolution Vertical resolution Signal-to-noise ratio Minimum illumination Zoom speed Focus speed Iris Maximum aperture ratio Focal length H Angular field of view V Electronic shutter AGC BLC Zoom ratio Iris range 768 (H) x 494 (V) 3. 65 mm (H) x 2. 71 mm (V), 1/4" internal/line-lock / multiplexed vertical drive (VD2) 15. 724 kHz 59. 94 Hz 1. 0 V[p-p] NTSC composite/75 more than 480 lines at center (C/L) more than 350 lines at center 50 dB (AGC OFF, weight on) 2. 0 lx (0. 2 foot-candle) (AGC HIGH) approx. 4. 5 s (TELE/WIDE) in manual mode approx. 6. 0 s (FAR/NEAR) in manual mode automatic (open/close is possible)/manual 1 : 1. 6 (WIDE) - 3. 0 (TELE) 3. 78 - 67. 1 mm (17. 8X) 3. 2° - 51. 7° 2. 4° - 39. 9° 1/60 (OFF), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000 s ON (LOW)/ON (MID)/ON (HIGH)/OFF selectable ON/OFF (SETUP MENU) x 18 +digital zoom x2 F1. 6 - 22, CLOSE Power source Power consumption Ambient operating temperature Dimensions Weight 24 V AC, 60 Hz 14 W -10°C - +50°C (14°F - 122°F) 120 (D) x 191 (H) mm (4-3/4" (D) x 7-1/2" (H)) approx. [. . . ]