User manual PANASONIC WV-CS574

[. . . ] Color CCTV Camera Operating Instructions ENGLISH FRANÇAIS Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Model No. WV-CS574 ENGLISH VERSION For U. S. A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] 1* POSITION SET PRESET ID ALC/MANUAL DWELL TIME SCENE FILE PRESET SPEED ON ALC 10S 1 ········| L H RET DEL RET DEL To Return to the Setup Menu Move the cursor to RET and press the CAM (SET) button. ** PRESET NUMBER SET ** 1* 2 5 6 9 10 13 14 17 18 21 22 25 26 29 30 ID:DOOR RET 3 7 11 15 19 23 27 31 4 8 12 16 20 24 28 32 2. To set scene file details Move the cursor to a scene file number and press the CAM (SET) button. The setting menu appears. ** SCENE FILE 1 ** SHUTTER AGC SENS UP WHITE BAL MOTION DET AF MODE AUTO ON(MID) OFF ATW1 1 MANUAL L RET -30- Deleting Preset Positions 1. Move the cursor to PRESET 1 and select the position number to be deleted with the joystick. ** SET UP MENU ** PRESET 1 MAP HOME POSITION OFF SELF RETURN OFF AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON SPECIAL1 CAMERA RS485 SET UP PASSWORD LOCK OFF Home Position Setting (HOME POSITION) 1. To set a position number for the home position Move the cursor to HOME POSITION and select a desired position number with the joystick. Select OFF if you are not using the home position function. ** SET UP MENU ** PRESET 1 MAP HOME POSITION 15 SELF RETURN OFF AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON SPECIAL1 CAMERA RS485 SET UP PASSWORD LOCK OFF 2. Press the CAM (SET) button to display the preset setting menu. Move the cursor to DEL and press the CAM (SET) button. PRESET NO. 1* POSITION SET PRESET ID ALC/MANUAL DWELL TIME SCENE FILE PRESET SPEED ON ALC 10S 1 ········| L H Self Return Setting (SELF RETURN) You can set a return time and one of operation modes with this menu. Move the cursor to SELF RETURN, select a return time from among the following with the joystick and press the CAM (SET) button to confirm your selection. ** SET UP MENU ** PRESET 1 MAP HOME POSITION 1 SELF RETURN OFF AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON SPECIAL1 CAMERA RS485 SET UP PASSWORD LOCK OFF RET DEL This deletes the preset position and the PRESET NUMBER SET menu appears. The * mark on the right of the number disappears. ** PRESET NUMBER SET ** 1* 2 5 6 9 10 13 14 17 18 21 22 25 26 29 30 ID:DOOR RET 3 7 11 15 19 23 27 31 4 8 12 16 20 24 28 32 1MIN OFF 2MIN 3MIN 5MIN 10MIN 20MIN 60MIN 30MIN Note: Your selected preset number is cancelled only in the SEQ and SORT mode. The previously set parameters (for PAN, TILT positions, etc. ) are not changed. If you want to change these parameters, you must set them again. MIN stands for minute(s). Select an operation from among the following with the joystick and press the CAM (SET) button to confirm your selection. ** SET UP MENU ** PRESET 1 MAP HOME POSITION 1 SELF RETURN 10MIN AT AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON SPECIAL1 CAMERA RS485 SET UP PASSWORD LOCK OFF OFF AT HP PT AP SR SQ -31- Auto Mode Selection (AUTO MODE) 1. To set auto mode Move the cursor to AUTO MODE and select a mode with the joystick. Modes change as follows: ** SET UP MENU ** PRESET 1 MAP HOME POSITION OFF SELF RETURN OFF AUTO MODE AUTO PAN AUTO PAN KEY AUTO PAN DIGITAL FLIP ON SPECIAL1 CAMERA RS485 SET UP PASSWORD LOCK OFF This determines the starting point and the cursor moves to END. ** AUTO PAN ** POSITION SPEED ENDLESS DWELL TIME PAN LIMIT ZOOM LIMIT RET START END ····|···· L H OFF 1S OFF OFF (3) Move the joystick to select a panning endpoint and press the CAM (SET) button. This determines the endpoint and the cursor moves to POSITION. To set a panning speed Move the cursor to SPEED, and set a panning speed with the joystick. ** AUTO PAN ** POSITION SPEED ENDLESS DWELL TIME PAN LIMIT ZOOM LIMIT RET START END ····|···· L H OFF 1S OFF OFF 2. When AUTO PAN is selected, set details as follows: OFF SEQ SORT AUTO PAN PATROL Move the cursor to AUTO PAN O and press the CAM (SET) button to display the AUTO PAN setting menu. To set a panning starting point and panning endpoint Follow the steps below. (1) Move the cursor to POSITION and press the CAM (SET) button. The cursor moves to START. ** AUTO PAN ** POSITION SPEED ENDLESS DWELL TIME PAN LIMIT ZOOM LIMIT RET ** AUTO PAN ** POSITION SPEED ENDLESS DWELL TIME PAN LIMIT ZOOM LIMIT RET START END ····|···· L H OFF 1S OFF OFF START END ····|···· L H OFF 1S OFF OFF The panning speed increases when the joystick is moved to the right, and decreases when it is moved to the left. [. . . ] CLEANING: ON CLEANING: OFF * Do not do this operation with the previous dome type camera models (WV-CS850 series, WV-CS854, WV-CS854E series, WV-CW860 series, WV-CW864, WV-CW864E series, and WV-CS564), doing so may cause a malfunction. -55- TROUBLESHOOTING Before requesting service, check the following symptoms to see if you can solve the problem yourself. If the countermeasures described below do not correct the problem, or if the symptoms you are experiencing are not covered here, contact a quality service person or system installer. Problem Cause and Recommended Action Reference Pages · Is the camera connected correctly?Check the operating instructions that come with your system controller. ­ No picture (dark screen) · Is the lens iris closed?Execute the iris reset from the system controller you are using. 29-30 · Is the camera set up for a fixed shutter speed? 30, 44 · Is the lens iris open? [. . . ]