User manual PANASONIC WV-CS604A

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is interned to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The serial number of this product may be found on the rear of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. [. . . ] 7 ADVANCED CONTROL OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 OPTIONAL ACCESSORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3 ENGLISH PREFACE The Panasonic`s Video Monitor WV-CS604A produces sharp colour pictures and audio output. FEATURES · Approx. 223 mm (8-3/4" inches) actual diagonal visual size. · A or B channel selectable for input and output signals. · Looped through BNC connectors for video inputs and outputs. · Operations controlled by moving the cursor in the setup menu. · Automatic frequency control activated from setup menu. · Looped through RCA connectors for audio input and output. · For mounting in optional 19" rack with adapter WVQ52AE (up to two monitors). PRECAUTIONS · Do not block the ventilation slots. Press once (switch remains down (;)) to select the INPUT B signal. Press again (switch comes up (l)) to select the INPUT A signal. r Menu Button (MENU) Press to display the setup menu. t Cursor Buttons (D, C) Press these buttons to select a parameter by moving the cursor up or down in the parameter rows. y Increment/Decrement Buttons (AUDIO ­, +) · Setup screen adjustment (Menu displayed) Press these buttons to adjust the level of an item selected in the setup menu. Note: If you select NORMAL SETTINGS in the Setup menu, and press the Increment/Decrement button (­) or (+), all menu parameters will be restored to the factory default settings. · Audio adjustment (Menu not displayed) Press these buttons to increase or decrease the sound volume. u Focus Control (FOCUS) This control adjusts the screen focus. i Screen Control This control is preset at the factory. o Audio Input Connector (AUDIO IN) For input of audio signal from an outboard device. !0 Audio Output Connector (AUDIO OUT) The audio input signal connected to the audio input connector o is looped through to this connector. 5 !1 Video A input Connector (VIDEO A IN) For input of the PAL composite video signal from an outboard device. !2 Video A output Connector (VIDEO A OUT) The video input signal connected to the video input connector !1 is looped through to this connector and terminated automatically. [. . . ] · Up to 10 monitors can be hooked up in this configuration before signal loss occurs. Total cable length should not exceed 150 m (500 feet). · Recording on the VTR Connect the Video Output terminal A or B of the camera, to the Video Input Connector of the VTR with a 75ohm coaxial cable. 7 ADVANCED CONTROL OPERATION s Displaying the Setup Menu 1. Press the power switch once (switch remains down (;)) to turn on the power of the monitor. Select the input channel by pressing the input signal select switch. [. . . ]