User manual PANASONIC WV-CS854

[. . . ] Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument, eller andra normativa dokument som framstölls i Direktiv 73/23/EEC och 89/336/EEC. Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivien 73/23/EEC ia 89/336/EEC. Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som fælger bestemmelsene i direktiven 73/23/EEC og 89/336/EEC. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is interned to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] FWD: This button is used to move the camera picture forward on the selected monitor after the HISTORY BACK button has been used. This button also selects the next page or step of the setup tables on the SETUP MENU. Set Up button (SET UP) This button, in combination with the ALT button, toggles the display of the SETUP MENU of the Matrix Switcher On and Off. The indicator (Green) lights up to indicate that the setup mode is selected. Camera Menu button (CAM MENU) This button, in combination with the ALT button, toggles the display of the selected Camera's Set Up Menu On and Off. The indicator (Green) lights up to indicate that the camera's setup mode is selected. Status button (STATUS) This button toggles the display of the Camera Site Status Table On and Off on the selected monitor. Note: In combination with the ALT button, this button toggles the display of the System Status Table On and Off on the selected monitor. Alarm Recall button (RECALL) This button is used to recall the Alarm Logs (Activated alarm records). It goes off when the alarm is reset automatically. To turn the indicator off, press the ALM RESET button. Multiscreen Monitor button (MULTI SCREEN) This button is used to operate the multiscreen monitor connected to the MULTISCREEN OUT connector of the Video Multiplexer. The indicator (Green) lights up to indicate that the multiscreen monitor is selected. Note: When the REC OUT of the Video Multiplexer is used as Multiscreen 2 Monitor, this button alternately selects the Multiscreen or Multiscreen 2 Monitor. The indicator blinks to indicate that the Multiscreen 2 monitor is selected. Spot Monitor button (SPOT) This button is used to operate the spot monitor connected to the SPOT OUT connector of the Video Multiplexer. The indicator (Green) lights up to indicate that the spot monitor is selected. Alarm Reset button (ALM RESET) This button is used to cancel an active alarm. Press this button, while the alarm function is activated, to reset an alarm of the currently selected unit and return the system to the condition before the alarm function was activated. -7- Press this button, in combination with the ALT button, to reset all alarms. Sequence button (SEQUENCE) This button is used to activate the sequence mode. In this mode, a series of camera pictures is displayed in succession on the monitor screen for the specified duration. The indicator (Green) lights up to indicate that this mode is selected. [. . . ] Select the desired camera referring to the Camera Selection procedure. 1 2 3 4 5 6 AUX 2. Press the CAMERA SET ON button to display the Camera Set Up Menu. The indicator (Green) lights up to indicate that the mode is selected. 7 MON 8 9 CAM CAMERA SET 0 ESC SET ON T/L MODE OFF -12- 3. Select an item by moving the joystick UP or DOWN. [. . . ]