User manual PANASONIC WV-CST604

[. . . ] Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivien 73/23/EEC ia 89/336/EEC. Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som fælger bestemmelsene i direktiven 73/23/EEC og 89/336/EEC. THIS APPARATUS MUST BE EARTHED. To ensure safe operation the three-pin plug supplied must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connection to earth. [. . . ] The characters of the camera ID start blinking to identify the selection of the positioning menu. Camera ID setting menu ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 (). , '":;&#!?= +-*/%$ÄÜÖÆÑÅ SPACE POSI RET RESET WV-CST604. . . . . . . Setup menu ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 (). , '":;&#!?= +-*/%$ÄÜÖÆÑÅ SPACE POSI RET RESET WV-CST604. . . . . . . ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 (). , '":;&#!?= +-*/%$ÄÜÖÆÑÅ SPACE POSI RET RESET WV-CST604. . . . . . . ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 (). , '":;&#!?= +-*/%$ÄÜÖÆÑÅ SPACE POSI RET RESET WV-CST604. . . . . . . - 11 - · The display position of the camera ID on the monitor screen can be placed anywhere on the screen by using the Joystick. The positioning of the camera ID stops at the edges of the monitor screen. The camera ID moves faster when the Joystick is kept pressed for more than 0. 5 seconds. · After completing the positioning of the camera ID, press the CAM (SET) Button to return to the Character Editing menu. · To return to the normal camera picture mode, move the character cursor to the "END" position and press the CAM (SET) Button. · To return to the Setup menu for setting other items, move the character cursor to the "RET" position and press the CAM (SET) Button. ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 (). , '":;&#!?= +-*/%$ÄÜÖÆÑÅ SPACE POSI RET RESET WV-CST604. . . . . . . 3. Light Control Setting (ALC/ELC) · Display the Setup menu. · If necessary, refer to Setup Menu Display, for details on displaying the Setup menu on the monitor screen. · Move the cursor to the "ALC/MANUAL" mode position and select either the "ALC" or "MANUAL" mode by using the Joystick. Note: The back light compensation setting sub menu associated with this menu is described separately and should be setup after installing the camera at the site and observing the actual site picture. Setup menu ** SET UP ** CAMERA ID ALC/MANUAL SHUTTER AGC SYNC WHITE BAL AUTO PAN SPECIAL * OFF * ALC * OFF ON INT ATW * OFF 4. Back Light Compensation Setting (BACK LIGHT COMP) (1) · · · ALC Mode Confirm that the ALC mode is selected as follows. · Move the cursor to "RET" position by using the Joystick and press the CAM (SET) Button to return to the Set Up menu. * ALC CONT * BACK LIGHT COMP PRESET MASK SET * LEVEL RET . . . . I. . . . - + OFF - 13 - (2) MANUAL Mode Move the cursor ALC/MANUAL position by using the Joystick and select the MANUAL by using the Joystick. Control the level by using the Joystick. Manual setting menu * MANUAL CONT * IRIS . . . . I. . . . Shutter Speed Setting (SHUTTER) · Display the Setup menu. · If necessary, refer to Setup Menu Display, for details on displaying the Setup menu on the monitor screen. · Move the cursor to the SHUTTER mode position and select the electronic shutter speed by using the Joystick. The following electronic shutter speeds are available. OFF (1/50) 1/1000 1/120 1/2000 1/250 1/4000 1/500 1/10000 Camera setting menu ** SET UP ** CAMERA ID ALC/MANUAL SHUTTER AGC SYNC WHITE BAL AUTO PAN SPECIAL * OFF * ALC * OFF ON INT ATW * OFF 6. Gain Control Setting (AGC ON/OFF) · Display the Setup menu. · If necessary, refer to Setup Menu Display, for details on displaying the Setup menu on the monitor screen. · Move the cursor to the AGC mode position and select either ON or OFF mode by using the Joystick. Camera setting menu ** SET UP ** CAMERA ID ALC/MANUAL SHUTTER AGC SYNC WHITE BAL AUTO PAN SPECIAL * OFF * ALC * OFF ON INT ATW * OFF 7. [. . . ] Otherwise, the cutting surface will give the damage to the cables. b. The cables go through into the ceiling nothing to do. 3. Fix the Camera Mounting Angle onto the ceiling by using four camera mounting angle fixing screws (not provided). Caution: Install to support the load of 4 times the total weight. - 20 - 4. [. . . ]