User manual PANASONIC WV-CU650

[. . . ] Operating Instructions System Controller Model No. WV-CU650 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ENGLISH VERSION Caution: Before attempting to connect or operate this product, please read the label on the bottom. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN For U. S. A CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] Move the camera to a desired position by moving the 3D joystick. Enter a preset position number you wish to register by pressing the numeric buttons. The entered number will appear on the LCD. Mon01 Cam001 ___12 F1 F2 F3 F4 3. Press the PRESET/PGM PRESET button while holding down the SHIFT button. The preset position will be registered, and "Memory" will appear on the LCD. Mon01 Cam001 ____3 F1 F2 F3 F4 3. The associated camera function will be activated. Note: If you assign camera functions to the joystick function buttons (A, B, and top buttons), you can recall the camera functions by pressing these buttons. 47 MENU FUNCTION DESCRIPTIONS for details. Mon01 Cam001 Memory Pre12 Note: If the registration have failed, "Invalid" will appear on the LCD. (Example: When the selected camera does not support preset position control) Mon01 Cam001 Invalid Pre12 41 Camera Position Control Camera position is the association of camera numbers and preset position numbers. Up to 1 000 camera positions are registrable in the system, and you can move a desired camera to a desired preset position only by entering a camera position. Note: To activate this function, preset positions and camera positions need to be registered. 65 Camera Position Registration or Clearing. ) 1. Enter a camera position number by pressing the numeric buttons. The entered number will appear on the LCD. Mon02 Cam128 HD316 F1 F2 F3 F4 Mon02 Cam003 HD316 F1 F2 F3 F4 Mon02 Cam001 HD316 F1 F2 F3 F4 2. To return to the camera image more recently selected, press the + button while holding down the HISTORY button. The camera image more recently selected will be displayed on the monitor. (Camera 1 3 128) Mon01 Cam001 ___11 F1 F2 F3 F4 3. The registered camera and preset position will be selected, and the camera position image will be displayed on the active monitor. Mon02 Cam001 HD316 F1 F2 F3 F4 Mon01 C-P011 HD316 F1 F2 F3 F4 Mon02 Cam003 HD316 F1 F2 F3 F4 Camera Selection Recall Every time you select a camera or camera position, this system controller memorizes up to 10 steps of camera selection. You can recall these operations in order or reverse order. In the following procedure, you can track back the camera images formerly displayed. Note: After power-off or system unit selection, the memorized camera operations will be cleared. In the following example, Camera 1 3 128 has been selected. [. . . ] 62 to 65. When pressing one of the function buttons (F1 to F4/F5 to F8), there is a difference between the function displayed on the LCD and that recalled actually. Function assignment settings of the F1 to F8 buttons may be wrong. 52 to 54. The LCD title may have been edited wrongly. 68. There is an invalid button even when it is pressed. Can the selected monitor, camera, or system unit activate the function assigned to the button?Depending on system devices, available functions will differ. [. . . ]