User manual PANASONIC WV-CU950

[. . . ] System Controller Operating Instructions Model Nos. WV-CU950 WV-CU650 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ENGLISH VERSION Caution: Refer to the name plate on the rear of this product to verify identifications and power ratings. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN For U. S. A CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] Select a system unit, monitor, and desired camera. Enter a preset position number by pressing the numeric buttons. The entered number will appear on the LCD. I Home Position Control Home position is the default preset position. You can move the camera to the home position only by pressing the PRESET/PGM PRESET button. Note: To activate this function, you need to register the home position of combination camera. (Refer to the operating instructions of combination camera. ) 1. Select a system unit, monitor, and desired camera. The camera will move to the registered home position, and the home position image will be displayed on an active monitor. Note: You can also move the camera to the home position by pressing the button 0, and then the PRESET/PGM PRESET button. Mon02 Cam001 F1 F2 F3 ____3 F4 3. The camera will move to the registered preset position, and the preset position image will be displayed on an active monitor. I Camera Function Control You can recall the camera functions of combination cameras by entering the function number from this system controller. Refer to the operating instructions of combination camera for the association of camera numbers and functions. Enter a camera function number by pressing the numeric buttons. The entered number will appear on the LCD. Mon02 Cam001 Pre003 F1 F2 F3 F4 To register preset positions 1. Move the camera to a desired position by moving the 3D joystick. Enter a preset position number you wish to register by pressing the numeric buttons. The entered number will appear on the LCD. Mon01 Cam001 F1 F2 F3 ___12 F4 Mon01 Cam001 F1 F2 F3 ____3 F4 3. Press the PRESET/PGM PRESET button while holding down the SHIFT button. The preset position will be registered, and "Memory" will appear on the LCD. 3. The associated camera function will be activated. Note: If you assign camera functions to the joystick function buttons (A, B, and top buttons), you can recall the camera functions by pressing these buttons. 57 MENU FUNCTION DESCRIPTIONS for details. Mon01 Cam001 Memory Pre012 Note: If the registration have failed, "Invalid" will appear on the LCD. (Example: When the selected camera does not support preset position control) Mon01 Cam001 Pre012 Invalid 51 I Camera Position Control Camera position is the association of camera numbers and preset position numbers. [. . . ] Can the selected monitor, camera, or system unit activate the function assigned to the button?Depending on system devices, available functions will differ. Refer to the operating instructions of selected system unit. Users who have logged into the system may not be authorized to control cameras with the button. [. . . ]