User manual PANASONIC WV-CW864

[. . . ] Color CCTV Camera Operating Instructions Model No. WV-CW864 ENGLISH Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. FRANÇAIS ENGLISH VERSION CONTENTS IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . 3 PREFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Camera Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The origin of the direction (North) is set. Note: Area titles are highlighted until the origin is set. RET Special 1 menu ** SPECIAL PRIVACY ZONE PROPO. P/T AREA TITLE PATROL ALARM IN/OUT PASSWORD LOCK CLEANING EL-ZOOM PRESET ALM IMAGE HOLD RET 1 ** OFF(ENB) ON ON(NESW) STOP OFF OFF ON OFF OFF AREA TITLE (NESW) setting menu ** DIRECTION(NESW) ** PUSH SET PAN/TILT PUSH SET ZOOM/FOCUS POSI + N PAN/TILT setting menu ** DIRECTION(NESW) ** PAN/TILT PUSH SET ZOOM/FOCUS PUSH SET POSI U TILT D/L PAN R + N RET 28 3. Move the cursor to PUSH SET for ZOOM/FOCUS, and press the CAM (SET) key. ZOOM/FOCUS is highlighted and "U ZOOM D/L FOCUS R" appears. Adjust the zoom or focus by using the joystick. Move the cursor to POSI O , and press the CAM (SET) key. The area title position appears on the monitor screen. If needed, change the display position by using the joystick, and press the MON (ESC) key. An area title always appears under the camera ID. If the camera ID and an area title are set to be shown in separate positions, the area title appears above the camera ID. Move the cursor to RET, and press the CAM (SET) key. The SPECIAL 1 menu appears again. ZOOM/FOCUS setting menu ** DIRECTION(NESW) PAN/TILT PUSH PUSH ZOOM/FOCUS POSI U ZOOM D/L FOCUS + N ** SET SET R RET Display Position setting menu FLOOR 1 N Setting [ON (USER)] If ON (USER) is selected on the SPECIAL 1 menu, the Area Title selection menu appears. The screen has a number column and title column above RET and RESET. Note: An area number followed by an asterisk * has already been preset. To select a camera direction, move the cursor to the desired number, and press the CAM (SET) key. The direction menu of the selected number appears. Adjust PAN/TILT, ZOOM/FOCUS and display the position in the as same way as AREA TITLE, DIRECTION (NESW). To add a user-customized title, move the cursor to the title of the desired number, and press the CAM (SET) key. The AREA TITLE menu of the selected number appears. Move the cursor to the desired character in the character field using the joystick, and press the CAM (SET) key. The selected character appears in the editing field and the blinking cursor moves one position to the right. Repeat steps 1 and 2 until one area title is completed. [. . . ] 200 mm (D) x 360 mm (H) [7-7/8" (D) x 14-3/16" (H)] approx. 5 kg (11 lbs) * Note: The picture quality and camera performance are not guaranteed until the inside temperature rises up to ­10 °C (14 °F). 58 Auto Focus Auto mode Auto pan key Digital flip Camera ID Motion DET Alarm IN Alarm OUT B/W mode Privacy zone Proportional PAN/TILT Patrol Cleaning Image Hold Panning range Panning angle setting Panning mode Panning speed Tilting range Tilting mode Tilting speed Controls MANUAL/AUTO OFF/SEQ/SORT/AUTO PAN/PATROL SEQ/SORT/AUTO PAN/PATROL PLAY ON/OFF preset ID, camera ID, area title : up to 16 characters ON/OFF 4 inputs (ALARM IN 1 - 4) 2 outputs (ALARM/AUX1, B/W/AUX2) AUTO/ON/OFF ON/OFF, up to 8 zones ON/OFF LEARN/PLAY/STOP, up to 30 seconds ON/OFF ON/OFF 360° endless possible (in auto-pan mode) manual/sequential position/sort position/auto pan manual : approx. 0. 1 °/s to 120 °/s 8-steps/64-steps sequence position : maximum approx. 300 °/s 0 ° to 180 ° manual/sequential position/sort position manual : approx. [. . . ]