User manual PANASONIC WV-LD1500

[. . . ] Video Monitor Operating Instructions Model Nos. WV-LD1500 WV-LD2000 ENGLISH Video Monitor WV-LD Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. FRANÇAIS ENGLISH VERSION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN For Canada This Class A digital apparatus complies with Canadian ICES-003. For U. S. A CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. SA 1965 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] · Do not mount the monitor on places subject to constant vibrations. · Use only the supplied power cord or AC adapter. · The surface of the LCD Panel is applied by special coating. Do not point hard objects and wipe by abrasive material. It can cause scratches and damages on the LCD screen. · The LCD panel is made from a very precise technology. Some bright and dark spots may exist on the monitor screen. It is operating normally if there are 99. 99 % active pixels. 6 PREFACE Video Monitor WV-LD1500/2000 is 15"/20" LCD monitor, using a high-brightness liquid crystal panel and (3D)* separation circuit for improved definition of picture display. *NTSC system only FEATURES · Built-in VGA panel with high brightness, high contrast ratio · Supporting composite video signal, S-video signal, and analog RGB signal for personal computer (PC) · Automatically switchable NTSC and PAL system · PC display capacity supporting VGA (640x480) resolutions. Picture size and display position can be automatically adjusted. · Audio input x1, audio output x1, and speaker output (max. Note: This connector and the VIDEO-B IN connector is connected to the same device. When an S-video signal and composite video signal are supplied from a device at the same time, the S-video signal is accepted by priority. !5 Video input B connector (VIDEO-B IN) Accepts a composite video signal from an external device. !6 Video output B connector (VIDEO-B OUT) Supplies a composite video signal accepted by the VIDEO-B IN connector to another external device. !7 Video input A connector (VIDEO-A IN) Accepts a composite video signal from an external device. !8 Video output A connector (VIDEO-A OUT) Supplies a composite video signal accepted by the VIDEO-A IN connector to another external device. !9 Security slot You can attach a lock that meets the industry standard specification (3 to 3. 26 mm x 7 to 7. 26 mm x 3. 5 to 4 mm) {0. 12" x 0. 28" x 0. 15"}. Timing data chart for PC input This monitor supports the timing data listed as follows. Standard Industry VESA (Video Electronics Standards Association) Resolution 640 x 480 640 x 480 640 x 480 Dot clock frequency (MHz) 25. 17 31. 50 31. 50 Horizontal frequency (kHz) 31. 46 37. 86 37. 50 Vertical frequency (Hz) 59. 93 72. 81 75. 00 Notes: · If an input signal does not meet the standards (dot clock frequency, horizontal frequency, and vertical frequency), "OUT OF RANGE" will appear on the screen. · This monitor does not support plug-and-play. 9 INSTALLATIONS WARNING The installations described in the figures should be made by qualified service personnel or system installers. Caution: Attach this monitor to a flat wall with a locally procured mounting bracket. After the installation, secure the monitor to prevent dropping. I Mounting on the Wall To mount the monitor on the wall, a mounting bracket (locally procured, VESA standard 100 mm {3-9/10"} pitch) and screw (M4, locally procured) are required. Notes: · Do not block the ventilation opening or slots on the cover. · Do not mount the monitor on places subject to constant vibrations. [. . . ] The SETUP menu will be displayed. SETUP LANGUAGE PC EXIT 3. Move the cursor to LANGUAGE by pressing the C or D button. Move the cursor to the desired language by pressing the C or D button. The selected language will be applied for monitor display. 17 TROUBLESHOOTING Check the following before requesting repair. [. . . ]