User manual PANASONIC WV-LFR5C3

[. . . ] Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument, eller andra normativa dokument som framstölls i Direktiv 73/23/EEC och 89/336/EEC. Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivien 73/23/EEC ia 89/336/EEC. Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som fælger bestemmelsene i direktiven 73/23/EEC og 89/336/EEC. For U. K. FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. [. . . ] (1) Move the cursor to POSITION SET and press the CAM (SET) key. (2) Move the joystick to the left or right to select a panning start position and press the CAM (SET) key. This determines the start position and the cursor moves to END. (3) Move the joystick to the left or right to select a panning end position and press the CAM (SET) key. This determines the end position and the cursor moves to POSITION SET. ** AUTO PAN ** POSITION SET SPEED ENDLESS DWELL TIME RET START END . . . I. . . . L H ON 1S ** AUTO PAN ** POSITION SET SPEED ENDLESS DWELL TIME RET START END . . . I. . . . To set a panning speed Move the cursor to SPEED, and move the joystick to the left or right to set a panning speed. The panning speed increases when the joystick is moved to the right, and decreases when it is moved to the left. Caution: If the panning range is changed after the camera has not panned for a long time or has been panning in the same panning range, the picture may not be clear or noise may appear. If this is the case, pan the camera fully several times. If this does not eliminate the problem, refer servicing to qualified service personnel. ** AUTO PAN ** POSITION SET SPEED ENDLESS DWELL TIME RET START END . . . I. . . . Follow the steps below to edit the camera ID characters: 2-1 Move the cursor to CAMERA ID and press the CAM (SET) key to display the character editing menu. The character cursor on the letter "0" and the editing cursor on the left of the editing area start blinking. 2-2 Move the character cursor to the character you want to change by using the joystick, and press the CAM (SET) key. The selected character appears in the editing area. (The blinking editing cursor moves to the right automatically at this moment. ) 2-3 Repeat the steps above until all characters are edited. After editing the camera identification characters, follow the steps below to set the position of the CAMERA ID on the monitor screen. 3-1 Move the cursor to POSI, and press the CAM (SET) key to display the ID position menu. The CAMERA ID starts blinking and the ID position menu appears in the display. 3-2 Use the joystick to decide the position of the CAMERA ID on the monitor screen. Press the MON (ESC) key to fix the position, and return to the character editing menu. Notes: · When you want the pointer to move to a specific character in the editing area, select a new character, and press the CAM (SET) key. [. . . ] Top cable exit Push the decoration cover against the camera mounting angle. 6. Tighten the camera fixing screw with a screwdriver. - 33 - When using the optional bracket for mounting refer to the Operating instruction for the WV-Q105, WV-Q106, WV-Q107 or WV-Q108. CONNECTIONS Precaution: The following connections should be made by qualified service personnel or system installers in accordance with all local codes. 220 - 240V AC (WV-CS650, WV-LFR5C3) 24V AC (WV-CS654) Data cable (Only for WV-LFR5C3) RS485 cable Video Output Cable BNC Plug Coaxial Cable (5C-2V) To Video IN (CAMERA IN) BNC Plug T The coaxial cable length (RG-6/U, 5C-2V) for the connection is up to 1 200 meter (4, 000 ft. ) Note: When powered up, the unit performs a self-check (including one panning, tilting, zooming and focusing operation). q Power supply connection Recommended wire gauge sizes for 24V AC line Copper wire size (AWG) Length of Cable (Approx. ) (m) (ft) #20 #18 #24 #22 (0. 22mm2) (0. 33mm2) (0. 52mm2) (0. 83mm2) 20 65 30 100 45 160 75 260 Accessory Connector Information Pin No. 1: 2: 3: 4: Power Source 24 V AC LIVE 24 V AC NEUTRAL Ground Not use Prepare the individual conductors for clamping. Use MOLEX band tool part number 57027-5000 (for UL-Style Cable UL1015) or 57026-5000 (for UL-Style UL1007) for clamping the contacts. [. . . ]