User manual PANASONIC WV-LZ6110

[. . . ] Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivien 73/23/EEC ia 89/336/EEC. Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som fælger bestemmelsene i direktiven 73/23/EEC og 89/336/EEC. FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. WARNING CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS APPARATUS MUST BE EARTHED IMPORTANT The wires in this mains lead are coloured in accordance with the following code. Green-and-yellow: Earth Blue: Neutral Brown: Live As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. [. . . ] OFF: The speed is constant at the fastest level on the communication command regardless of the zoom ratio. Special 1 menu ** SPECIAL PRIVACY ZONE PROPO. P/T AREA TITLE PATROL ALARM IN/OUT PASSWORD LOCK CLEANING EL-ZOOM PRESET ALM IMAGE HOLD RET 1 ** OFF(ENB) ON ON(USER) STOP OFF OFF ON OFF OFF Special 1 menu q Area Title (AREA TITLE) Up to 8 area titles can be added in specific positions. Select ON (NESW), ON (USER) or OFF by moving the joystick to the right or left. ON (NESW): An area title is displayed indicating the camera direction: North (N), North-East (NE), East (E), South-East (SE), South (S), South-West (SW), West (W) and North-West (NW). ON (USER): A user customized area title is displayed with a maximum of 16 characters. A submenu appears except when OFF is selected. ** SPECIAL PRIVACY ZONE PROPO. P/T AREA TITLE PATROL ALARM IN/OUT PASSWORD LOCK CLEANING EL-ZOOM PRESET ALM IMAGE HOLD RET 1 ** OFF(ENB) ON ON(NESW) STOP OFF OFF ON OFF OFF AREA TITLE (NESW) setting menu PAN/TILT setting menu Settings for ON (NESW) 1. Move the cursor to PUSH SET on the PAN/TILT line, then press the CAM (SET) key. PAN/TILT is highlighted and "U TILT D/L PAN R" appears. Move the joystick to turn the camera north, then press the CAM (SET) key. The origin of the direction (North) is set. Note: Area titles appear in reverse video until the origin is set. ** DIRECTION(NESW) ** PAN/TILT PUSH SET ZOOM/FOCUS PUSH SET POSI U TILT D/L PAN R p p + N RET 27 3. Move the cursor to PUSH SET on the ZOOM/FOCUS line, then press the CAM (SET) key. · To cancel one area title, move the cursor to RESET, in the AREA TITLE menu, then press the CAM (SET) key. · To return to the SPECIAL 1 menu, move the cursor to RET, then press the CAM (SET) key. · To erase all the area titles, move the cursor to RESET, in the AREA TITLE selection menu, then press the CAM (SET) key. Notes: · An area title is displayed under the camera ID if both of them are set in the same position. If different, they are displayed in the area title position. · An area title appears while the camera direction deviates within 45 degrees from the set position. If two or more area numbers share a common subject in a scene, the title of the largest number is displayed. AREA TITLE menu AREA TITLE 1* 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ (). , '":;&#!?= +-*/%$ÄÜÖÆÑÅ SPACE POSI RET RESET . . . . . . . . . . . . . . . . Display Position setting menu FLOOR 1 NORTH q Patrol (PATROL) A routine of manual operations can be stored for 30 seconds at maximum and reproduced repetitively. For PATROL LEARN, set the following parameters for the starting position. These parameters are stored when PATROL LEARN mode starts. · PAN/TILT/ZOOM/FOCUS settings · IRIS setting · SHUTTER setting · AGC setting · SENS UP setting · WHITE BALANCE setting · IMAGE HOLD setting · AREA TITLE setting · DIGITAL FLIP setting · PRIVACY ZONE setting · CAMERA ID setting · PROPO. PT setting · PAN LIMIT setting · BURST setting · CLEANING setting After starting LEARN, the following manual operations are stored. · PAN/TILT/ZOOM/FOCUS operation · IRIS operation · Preset position movement Special 1 menu ** SPECIAL PRIVACY ZONE PROPO. P/T AREA TITLE PATROL ALARM IN/OUT PASSWORD LOCK CLEANING EL-ZOOM PRESET ALM IMAGE HOLD RET 1 ** OFF(ENB) ON ON(USER) PLAY OFF OFF ON OFF OFF 2. [. . . ] 5 s (FAR/NEAR) in manual mode automatic (open/close is possible)/manual 1 : 1. 6 (WIDE) - 3. 0 (TELE) 3. 79 - 83. 4 mm 2. 6° - 52. 3° 2. 0° - 39. 9° 1/50 (OFF), 1/120, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000 s ON (LOW)/ON (MID)/ON (HIGH)/OFF MAX 32 times, AUTO/FIX selectable ON/OFF (SETUP MENU) x 22 +digital zoom x10 F1. 6 - 22, CLOSE 24 V AC, 50 Hz 14 W -10°C - +50°C (14°F - 122°F) 120 (D) x 191 (H) mm (4-3/4" (D) x 7-1/2" (H)) approx. 2 kg (4. 4 lbs) 220 V - 240 V AC, 50 Hz 18 W WV-LZ6110A 56 AUTO FOCUS AUTO MODE AUTO PAN KEY Digital flip CAMERA ID SUPER-D2 MOTION DET ALARM IN ALARM OUT B/W mode PRIVACY ZONE Proportional PAN/TILT PATROL Cleaning Panning range Panning angle setting Panning mode Panning speed Tilting range Tilting mode Tilting speed Controls MANUAL/AUTO OFF/SEQ/SORT/AUTO PAN/PATROL SEQ/SORT/AUTO PAN/PATROL PLAY ON/OFF preset ID, camera ID, area title : up to 16 characters ON/OFF ON/OFF 4 inputs (ALARM IN 1 - 4) 2 outputs (ALARM/AUX1, B/W/AUX2) AUTO/ON/OFF ON/OFF, up to 8 zones ON/OFF LEARN/PLAY/STOP, up to 30 seconds ON/OFF 360° endless possible (in auto-pan mode) manual/sequential position/sort position/auto pan manual : approx. 0. 1°/s - 120°/s 8-steps/64-steps sequence position : maximum approx. 300°/s 0° - 180° manual/sequential position/sort position manual : approx. [. . . ]