User manual PANASONIC WV-NP1000

[. . . ] Network camera Operating Instructions Model Nos. WV-NP1000 WV-NP1004 PU SH TO The illustration above is of the WV-NP1004. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model numbers in these Operating Instructions are given without suffix. LO CK /EJ EC T -N WV P10 04 (Lens is option. ) Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About these operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Trademarks and registered trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] POP before SMTP: It is necessary to clear the POP server authentication first to use the SMTP server to send e-mails. SMTP: It is necessary to clear the SMTP server authentication to send e-mails. Default: None [User name] Enter the user name to access the server. Number of characters for the user name: 1 - 32 characters [Password] Enter the password to access the server. Number of characters for the password: 0 - 32 characters [Sender mail address] Enter the mail address of a sender. Entered mail address will be displayed in the "From" (sender) line of the sent mails. Number of characters for the sender address: 3 - 128 characters [SMTP server address]* Enter the IP address or the host name of the SMTP server used to send e-mails. Number of characters for the SMTP server address: 1 - 128 characters [POP server address]* When "POP before SMTP" is selected for "Authentication", enter the IP address or the host name of the POP server. Number of characters for the POP server address: 1 - 128 characters * Important: When entering the host name for "POP server address", it is necessary to configure the DNS settings on the [Network] tab of the "Network setup" page. ( page 39) 37 Configure the settings relating to the FTP server [FTP] Click the [FTP] tab on the "Server setup" page. ( page 37) The settings relating to the FTP server used to transmit the alarm images can be configured on this page. [FTP mode] Select "Passive" or "Active" for the FTP mode. When failed to establish the connection, select "Active". Default: Passive [FTP server address] Enter the IP address or the host name of the FTP server. Number of characters for the FTP server address: 1 - 128 characters Important: When entering the host name for "FTP server address", it is necessary to configure the DNS settings on the [Network] tab of the "Network setup" page. ( page 39) [User name] Enter the user name (login name) to access the FTP server. Number of characters for the user name: 1 - 32 characters [Password] Enter the password to access the FTP server. Number of characters for the password: 0 - 32 characters [Control port] Enter a control port number to be used for the FTP server. Available port number: 1 - 65535 Default: 21 38 Configuring the network settings [Network setup] The network settings and the settings relating to DDNS (Dynamic DNS) and SNMP (Simple Network management Protocol) can be configured on this page. The "Network setup" page has 3 tabs of the [Network] tab, the [DDNS] tab, the [SNMP] tab and the [FTP] tab. Configure the network settings [Network] Click the [Network] tab on the "Network setup" page. The following information is required to configure the network settings. Contact the network administrator or your Internet service provider. [. . . ] · Isn't the write protect switch set to "LOCK"?When the write protect switch is set to "LOCK", available size/total size indication of the SD memory card will be "**********KB/**********KB". ­ 66 Symptom Cause/solution · Check if the SD memory card is inserted firmly?Replace the SD memory card with a new one. (Generally, SD memory cards have a limited number of times to rewrite. ) Contact your dealer if this problem is not solved even after replacing the SD memory card. [. . . ]