User manual PANASONIC WV-NS202

[. . . ] Network Camera Network Operating Instructions Model No. WV-NS202 LOCK OPEN 202 -NS WV Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. CONTENTS Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About these operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Trademarks and Registered Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Viewer Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When "ON" is selected for "Preset ID", the preset ID will be displayed on images. [Auto focus] Select "AUTO" or "OFF" to determine whether to enable or disable the auto focus function after the camera has moved to a preset position. This function can be applied to each preset position. AUTO: The auto focus function will be activated after moving to a preset position. OFF: Does not activate the auto focus function after moving to a preset position. Default: OFF Note: When the preset position is set to shoot the following objects, it is recommended to select "OFF" since the camera can focus on them quickly. · An object whose depth never changes · An object whose contrast is low · An object with high luminance such as a spotlight [Dwell time] Select a dwell time (duration the camera stops for at each preset position) for the preset sequence operation. The selected dwell time will be applied to all preset positions. 5 sec/10 sec/20 sec/30 sec Default: 10 sec [Super Dynamic 3] Select "ON" or "OFF" to determine whether to turn on or off super dynamic 3 (SUPER-D 3). This function can be applied to each preset position. ON: Turn on SUPER-D 3 OFF: Turn off SUPER-D 3 Default: OFF [Mask area] When "OFF" is selected for "Super Dynamic 3", it is possible to compensate for backlight by masking brighter areas. Refer to page 35 for descriptions of how to mask. ZOOM buttons FOCUS buttons BRIGHTNESS buttons Control pad/buttons Refer to pages 6 and 7 for descriptions of how to operate these buttons/pad. Panning, tilting and zooming operations can also be carried out on the [Image/Position] tab. [CLOSE] button Click this button to close the "Preset No. " setup menu. 37 Configure the settings relating to the auto pan function ("Auto Pan" setup menu) Click the [SETUP>>] button of "Auto Pan" on the [Image/Position] tab of the "Camera setup" page. ( page 31) The settings relating to the auto pan function can be configured with the setup menu displayed in a newly displayed window. · Adjusted zoom and focus position for the auto pan function will be applied when [SET] button of "Start position" is clicked. These adjustments will not be applied by clicking the [SET] button of "End position". I Auto pan [Dwell time] Select a dwell time at the start point and the end point from the following. 5 sec/10 sec/20 sec/30 sec Default: 5 sec [Speed] Select a speed for the auto panning from the following. 3° /sec, 4° /sec, 5° /sec, 7° /sec, 10° /sec, 13° /sec, 18° /sec, 24° /sec Default: 13° /sec Note: Even when the selected zoom factor is higher than 22x, the camera will start panning with 22x zoom factor. Important: When "Dwell time" or "Speed" is edited, it is necessary to click the [SET] button to apply them. ZOOM buttons FOCUS buttons BRIGHTNESS buttons Control pad/buttons Refer to pages 6 and 7 for descriptions of how to operate these buttons/pad. Panning, tilting and zooming operations can also be carried out on the [Image/Position] tab. [. . . ] When displaying MPEG-4 images on two or more browser windows, images from two or more cameras are displayed in sequence on a single browser window. ­ 76 When using a PC on which Windows® XP Service Pack2 (SP2) is installed The following may occur during operation when using a PC on which Windows® XP Service Pack2 (SP2) is installed. Follow the instructions below when the following has occurred. By performing the following solutions, other applications and the security level may not be affected. The "Information Bar" expressed in the following symptom and solutions will be displayed just below the address bar only when there is information to communicate. Information Bar Symptom Solutions Reference pages The following message is displayed on the information bar. [. . . ]