User manual PANASONIC WV-NS954

[. . . ] Network Camera Operating Instructions Model Nos. WV-NS954 WV-NW964 WV-NS954 WV-NW964 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. CONTENTS Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About these operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Trademarks and registered trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Viewer software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The camera moves to adjust the position in order to set the clicked point as the center. When selecting an area in the main area by dragging the mouse, the selected area will be located at the center of the main area. In this case, the zoom ratio will be adjusted automatically. Zoom can be adjusted using the mouse wheel. Notes: · When the displayed image is being zoomed in more than 30x, the clicked point may not always be located at the center of the main area. · When the mouse is dragged to move the camera beyond its operable range, the camera will move to the requested direction and will stop at the end of the operable range. Then, the zoom ratio of the displayed image will automatically be adjusted. !9 @0 Notes: · When a user is using the audio transmission function with "Interactive (full duplex)" selected, the receiver button and the transmission button will be inoperable for the other users. When "Interactive (full duplex)" is selected, the transmission button is inoperable for other users. 8 · When MPEG-4 image is being displayed, it may take time to display the frame border indicating an area selected by dragging the mouse. Important: When the camera position is moved inadvertently while the power of the camera is on, restart the camera (restart) or refresh the camera position (position refresh) on the [Initialization] tab of the "Maintenance" page ( Setup Instructions). *1 Only operable by users whose access level is "1. Administrator" *2 Only operable by users whose access level is "1. Camera control" when "ON" is selected for "User authentication" ( Setup Instructions). *3 Operable by users who belong to the access level selected for "Authentication" on the [Audio] tab of the "Camera setup" page ( Setup Instructions). Refer to Setup Instructions for further information about the access level. Note: When operated by a lower access level user, images displayed on the screen may be changed temporarily. This does not affect operation of the camera. Monitor images from multiple cameras Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras (up to 16 cameras) can be displayed simultaneously. To display images on a multi-screen, it is necessary to register cameras in advance. 4 cameras can be registered as a group and up to 4 groups (16 cameras) can be registered. ( Setup Instructions) Important: · When simultaneously displaying images from 16 cameras on a multi-screen, panning, tilting and zooming are unavailable. · Only JPEG images can be displayed on a multi-screen. · When the power is turned off or the LAN cable is disconnected while displaying images, displaying images on a multi-screen from the "Live" page will become unavailable. · When displaying images on a multi-screen, panning/tilting/zooming by dragging the mouse are unavailable. [. . . ] Note: When the mouse button is held down while the mouse pointer is on this button, the image number will be decremented. When the mouse button is released, the decrement of the image number will stop and the image number displayed at the moment when the mouse button is released will be displayed. [FF]/[REW] buttons Fast playback/fast reverse playback will be performed. Each time the button is clicked, the playback speed will change. [. . . ]