User manual PANASONIC WV-Q52A

[. . . ] · Be sure to use the Camera Fixing Screw (provided with the camera) to mount the camera into this bracket. In Ceiling Minimum 180 mm Suspended Ceiling Maximum 40mm INSTALLATIONS 1. Make holes in the suspended ceiling by using the Template-A (provided). Make four holes (12 mm x 4) and remove the "C" area. [. . . ] A mounting slot (160 mm) is made as shown in the following. 4-12mm 160mm "C" 160mm Template A The model numbers listed in this Operating Instructions have no suffixed attached to it. 2. Drive a standard Anchor Bolt (#1 in illustration) into the centre of a slot made in the top ceiling, as shown in step 1. Drive another Anchor Bolt (#2 in illustration) into the relative second position as shown in the following. Attach one standard anchor nut at the "D" point measured by the Template-B (provided). Measure the "E" length by using the Template-B. (2) (1) "D" Anchor Bolt 136 mm "E" Template B Suspended Ceiling 4. Mount the Camera Mounting Angle (provided with camera) onto this bracket by using the four Camera Mounting Angle Fixing Screws (provided). WV-Q106 5-1. Put a standard anchor nut into the Anchor Bolt (2). Remove the Bracket Fall Prevention Wire from the Bracket Fall Prevention Angle Clip. Mount the camera to the Camera Fixing Angle by the Camera Fixing Angle Mounting Screw (provided with the camera). Fall Prevention Wire Fixing Angle Camera Mounting Angle 2 Camera 1 Note: Be sure to match the wire with the Fall Prevention Wire Fixing Angle as shown below. Camera Mounting Angle Fixing Screws (M2) Fall Prevention Wire Fixing Angle Note: When removing the Camera from the Camera Mounting Angle, loosen the Camera Fixing Screw (M3) and press up it by using the screw driver. Ring of the Fall Prevention Wire 12. Put the power and video cables into the ceiling. Press up -4- 14. Mount the Decoration Cover onto the camera. Refer to the Operating Instructions of the combination Camera WV-CS400 or WV-CS600 for mounting the camera. Press up the Decoration Cover of the camera with matching these tags of this bracket to the projections of the Decoration Cover. Tags Match the tags to the projections Projections 15. Rotate the Decoration Cover of the camera to clockwise. SPECIFICATIONS Ambient Operating Temperature : Dimensions : Weight : -10° C - +50° C (14° F - 122° F) 184 x 145 (D) mm 500g Weight and dimensions indicated are approximate. Specifications are subject to change without notice. ACCESSORIES Fall Prevention Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fall Prevention Angle Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Specifications are subject to change without notice. ACCESSORIES Fall Prevention Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fall Prevention Angle Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Template A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]