User manual PANASONIC WV-RM70

[. . . ] WV-RM70E Before attempting to connect or operate this product, please read these instructions completely. ESPAÑOL FRANÇAIS DEUTSCH ENGLISH Camera Controller ENGLISH VERSION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: Before attempting to connect or operate this product, please read the label on the bottom. We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directive EEC/89/336. Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta conforme ai seguenti standard o altri documenti normativi conformi alle disposizioni della direttiva CEE/89/336. Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatiefve dokumenten, overeenkomstig de bepalingen van Richtlijn 89/336/EEC. Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i overensstemmelse med den følgende standarder eller andre normative dokumenter i følge bestemmelserne i direktiv 89/336/EEC. [. . . ] Press the Up (D) Switch or the Down (C) Switch to move the Pan/Tilt Head toward up or down. Press the Right (B) Switch or the Left (A) Switch to move the Pan/Tilt Head toward right or left. While pressing these switches, the character is inversely displayed on the monitor screen. If the Up (D) Switch and the Right (B) Switch are pressed at the same time, the Pan/ Tilt Head moves diagonally towards Up and Right. 2. Press the Up (D) Switch or the Down (C) Switch to adjust the lens zoom to achieve the desired picture while observing the monitor screen. Press the Up (D) Switch to optically bring an object closer, pressing the Down (C) Switch has the reverse effect. Press the Right (B) Switch or the Left (A) Switch to adjust the lens focus to achieve a sharply picture while observing the monitor screen. 4-2. Display the Zoom/Focus Menu as shown in Fig. 12 by repeating the previous procedures. 4-3. 13 by repeating the previous procedures. t Z w / n F f 1:On Aux 2:Off Fig. Press the Left (A) Switch repeatedly to turn on or off the user's auxiliary switch 1 in the Receiver (WVRC100, WV-RC150 or WV-RC160). Press the Right (B) Switch repeatedly to turn on or off the user's auxiliary switch 2 in the Receiver (WVRC100, WV-RC150 or WV-RC160). 4-5. 15 by repeating the previous procedures. A Pan:Off R 4-4. Display the Wip / Def Menu as shown in Fig. 14 by repeating the previous procedures. Press the Right (B) Switch or the Left (A) Switch repeatedly to select the desired Panning mode off, Auto or Random. After completing the above settings, press the Program (PROG) Switch to return the previous Program Menu as shown in Fig. To return to the normal camera picture, press the Program (PROG) Switch again. Wip:Off, Def:On Fig. Press the Left (A) Switch repeatedly to turn on or off the housing wiper. Press the Right (B) Switch repeatedly to turn on or off the housing defroster. Camera Set Up The following functions are only available with the camera that has set up functions such as the Panasonic WV-CP610 or WV-BP510 series camera. Press the Program (PROG) Switch for more than 2 seconds to display the Program Menu. [. . . ] Use this mode if the computer takes time to process all of received data. Display the Communication Menu as shown in Fig. 30 by repeating the previous procedures. Move the cursor to the "Alarm Data" position by pressing the Up (D) Switch or the Down (C) Switch. [. . . ]