User manual PANASONIC WX-RP900

[. . . ] English TQB0E2273U Do not display any still part of the image for a long period In such cases the still part of the image remains dimly on the plasma screen ("image retention"). This is not considered a malfunction and is not covered by the warranty. Typical still image parts: Channel number, channel logo and other logos Still or moving pictures viewed in 4:3 or 14:9 aspect ratio Video games Images from PC To avoid image retention, the contrast is lowered automatically and the screen becomes dim after a few minutes if no signals are sent or no operations are performed. 105) Notice for DVB / Data broadcasting / IPTV functions This TV is designed to meet the standards (as of August, 2011) of DVB-T (MPEG2 and MPEG4-AVC(H. [. . . ] Consult your local Panasonic dealer or broadcasters for more information and conditions of the services. Caution Turn off Mains power On / Off switch whenever inserting or removing the CI module. If a view card and a card reader come as a set, first insert the card reader, then insert the view card into the card reader. Insert the module in the correct direction. Rear of the TV CI slot Insert or remove completely CI module Insert the CI module (optional) The features that appear on screen are dependent on the contents of the selected CI module. For more details, read the manual of the CI module, or check with the broadcaster. 1 2 Select DVB-S , DVB-C or DVB-T (p. 20) Display the menu and select [Setup] select Setup access Using Common Interface 3 Select [Common Interface] select Common Interface Access access 4 Access Common Interface and follow the on-screen instructions Common Interface Slot 1: Module inserted On-screen instructions may not correspond to the remote control buttons. 59 Shipping Condition Resets the TV to its original condition, i. All settings other than [USB HDD Setup] are reset (channels, picture, sound settings, etc. After moving house "Retuning from Setup Menu" (p. You cannot copy the recorded contents of the USB HDD. 102) Caution All data in the USB HDD will be erased in the following cases: "Setting for USB HDD" (see below) · When formatting the USB HDD with this TV · When formatting the USB HDD to use on PC, etc. When the TV is repaired due to a malfunction, you may have to format the USB HDD again with this TV to use it. (All data will be erased when formatting. ) In order to use the USB HDD with your PC after recording with this TV, format it again on your PC. (Special operations or tools may be necessary to format on your PC. For details, read the manual of the USB HDD. ) The data recorded on the USB HDD with this TV can only be played back on this TV. You cannot play back its contents with another TV (including the TV of the same model number) or any equipment. Do not turn the TV off, pull out the mains plug or remove the USB HDD during operation (formatting, recording, etc. It may cause malfunction of the device or damage the recorded data. [. . . ] If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device's ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade. [. . . ]