User manual PANASONIC WZAD96

[. . . ] This 3D Eyewear can be used for Panasonic HDTVs supporting 3D and the Bluetooth® Wireless technology, that have the logo as shown below. Page 15) ( ENGLISH For the latest information on applicable models, visit our web site. Net/ Safety Precautions Danger About Prohibition of Heating Do not put 3D Eyewear in fire, heat it or leave it in places that can get hot. 3D Eyewear contains a lithium-ion polymer rechargeable battery, so heating may result in combustion or rupture that may cause burns or fire. [. . . ] The range may be less depending on the structure of the building, the environment and any obstacles between the receiver and the transmitter. Such obstacles as reinforced concrete walls and metal doors, in particular, obstruct the transmitter's signals. Interference from other equipment Due to radio interference, malfunctions may occur if the unit is placed too close to other equipment. We recommend keeping the unit as far away as possible from the following devices: Bluetooth® devices other than this unit, wireless LAN, microwaves, office automation devices, digital cordless telephones and other electronic devices. The unit is designed to automatically avoid radio interference from these household devices. However malfunctions may happen when radio interference occurs. 6 Identifying Controls Power switch Indicator lamp ENGLISH Charging port (DC IN) Power switch ON/OFF MODE Slide the tab to the ON/OFF position to switch the power on/off. Slide the tab once to the MODE position to change the mode between 3D and 2D. This is also used when registering the 3D Eyewear on the television. For details on registration, refer to the Registration page. ( page 9) Indicator lamp Lights or flashes during use or charging to show the status of the rechargeable battery and the registration. Shake off any dust from the cloth before use. Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off. Do not dunk the 3D Eyewear in liquid such as water when cleaning. avoid storing the 3D Eyewear in hot or highly humid locations. During the long period of disuse, full charge the 3D Eyewear once every 6 months to keep the battery performance. As the liquid crystal shutters (lens) are fragile and easily broken, be very careful when cleaning them. ENGLISH Disposal A lithium-ion polymer rechargeable battery is built in to the 3D Eyewear. please discard according to local regulations. When disposing this product, disassemble properly by following the procedure on the next page, and remove the internal rechargeable battery. Do not disassemble this product except when disposing of it. Danger As the rechargeable battery is specifically for this product, do not use it for any other device. [. . . ] Take the necessary steps (wearing glasses etc. The power of the 3D Eyewear turns off by itself. Are there any objects between the eyewear and television?The indicator lamp does not light when the power switch is set to "ON". [. . . ]