User manual PANASONIC WZDA96

[. . . ] English Notice for DVB / Data broadcasting / IPTV functions This TV is designed to meet the standards (as of August, 2011) of DVB-T (MPEG2 and MPEG4-AVC(H. Consult your local dealer for availability of DVB-T or DVB-S services in your area. Consult your cable service provider for availability of DVB-C services with this TV. This TV may not work correctly with the signal which does not meet the standards of DVB-T, DVB-C or DVB-S. [. . . ] This function varies depending on the broadcasters. 3 Select an MHP application to start Example: MHP App Launcher Guide Game Not Starting Not Starting Not Starting select start 4 Follow the on-screen instructions 62 Using Common Interface The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. This function may not be available in some countries or regions. video and audio signals may not be output depending on broadcasts or services. Although CI module may enable you to view some services, this TV does not guarantee all services (e. Please use only the approved CI module by the broadcaster. Consult your local Panasonic dealer or broadcasters for more information and conditions of the services. Caution Turn off Mains power On / Off switch whenever inserting or removing the CI module. If a view card and a card reader come as a set, first insert the card reader, then insert the view card into the card reader. Insert the module in the correct direction. Remove the CI module from the TV when placing the TV facing upward. 1 Display the menu and select [Picture] select Picture access 2 Select [Picture in Picture] select Picture in Picture Access access 1 DVB-T Remote control operations apply to the main screen. Main screen AV1 EXIT PandP Swap Sub screen How to operate in multi window Display the colour bar if it is not displayed Picture-in-Picture mode [PinP] 1 DVB-T Picture-and-Picture mode [PandP] 1 DVB-T AV1 (yellow) Multi Window AV1 AV1 (green) EXIT PinP Swap EXIT PandP Swap (blue) To exit multi window (red) To change the input mode or channel of sub screen 1 Swap sub screen 2 Change the input mode for main screen 1 DVB-T 3 Swap again (blue) (blue) or channel by the remote control (p. 21, 30) EXIT PandP Swap Swap Colour bar Note Each input mode can only be displayed either on main screen or sub screen. The sound comes from only the main screen in multi window. You cannot change the aspect ratio in multi window. hDMI is available only for main screen. Some signals are reformatted for suitable viewing on your display. 66 Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected. ] is shown in red, the signals may not be supported. pC menu setting To make settings "How to Use Menu Functions" (p. [. . . ] specifications Product fiche Manufacturer Model No. Energy efficiency class Visible screen size (diagonal) On mode average power consumption Annual energy consumption 1 Rated power consumption Standby power consumption 5 mm) stereo mini Jack × 1 PAL B, G, H, I, SECAM B, G, SECAM L, L' PAL D, K, SECAM D, K PAL 525/60 VHF E2 - E12 VHF A - H (ITALY) CATV (S01 - S05) CATV S11 - S20 (U1 - U10) VHF R1 - R2 VHF R6 - R12 VHF H1 - H2 (ITALY) UHF E21 - E69 CATV S1 - S10 (M1 - M10) CATV S21 - S41 (Hyperband) VHF R3 - R5 UHF E21 - E69 PP î Playback of NTSC tape from some PAL Video recorders (VCR) Playback from M. 0 Receiving systems / Band name Check the latest information on the available services at the following website. 1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. [. . . ]