User manual PANASONIC XT-G5776

[. . . ] {SELECT}, {SAVE}, {OK} and additional other functions are assigned to soft keys. Pay attention to soft keys to find functions you need during handset operation. For further information, visit http://www. panasonic. com/phonehelp or refer to Operating Instructions. ­2­ TG577x_QG(e). fm Page 3 Monday, February 20, 2006 3:22 PM Operating tips for KX-TG5776/KX-TG5777 { }: indicates button names/soft key names. Using the joystick The handset joystick can be used to navigate through menus and to select items shown on the display, by pushing it up {^}, down {V}, left {<}, or right {>}. Adjusting audio volume Push the joystick up {^} or down {V} repeatedly while talking. Handset soft keys The handset features 2 soft keys and joystick (middle soft key). [. . . ] i {SAVE} i {OFF} Press {CALL WAIT} when you hear call waiting tone. Basic operation (Base unit) Feature Adjusting the speaker volume Ringer volume Operation Press {^} or {V} repeatedly while talking. Press {^} or {V} repeatedly to select the desired volume. L To turn the ringer off, press and hold {V} until the unit beeps. Press {CALL WAIT} when you hear call waiting tone. Answering call-waiting call (2nd call) Answering system (Base unit) Feature Auto answer on/off Recording your greeting message (max. 2 minutes) Operation {ANSWER ON} 1 {GREETING REC} 2 Within 10 seconds, press {GREETING REC} again. 3 Speak clearly about 20 cm (8 inches) away from the MIC. 4 To stop recording, press {STOP}. When the {MESSAGE} button flashes on the base unit, press {MESSAGE}. Continue page 6. Listening to new messages For further information, visit http://www. panasonic. com/phonehelp or refer to Operating Instructions. ­5­ TG577x_QG(e). fm Page 6 Monday, February 20, 2006 3:22 PM Continued Answering system (Base unit) Feature Listening to old messages Erasing a message Using the answering system remotely Operation When the {MESSAGE} button does not flash on the base unit, press {MESSAGE}. Press {ERASE} during playback. 1 Dial your phone number from a touch tone phone. 2 After the greeting message starts, enter your remote code. (Default remote code is "111". ) L The unit plays back new messages. L After playing back new messages, the voice guidance starts. 3 Follow the voice guidance as necessary. Frequently asked questions Question How can I increase handset volume level?Why is the conversation noisy or cutting off?Cause/solution L Press {^} repeatedly while talking. L Try to relocate the base unit so that distance from location to use the handset will be minimized. L Send your unit to service, if your unit has same problem when the handset is next to the base unit. L Yes, you can add up to 7 additional accessory handsets and devices. L To purchase accessory handsets (KX-TGA570/KXTGA571/KX-TGA572) and devices (KX-TGA573/KXTGA575), please visit http://www. panasonic. com or call 1-800-332-5368. TTY users (hearing or speech impaired users) can call 1-866-605-1277. L You can leave handset on the base unit or charger anytime. [. . . ] Move closer to base, try again. " is displayed. Talk IN USE 00-00-00 "Talk" is displayed. Example: KX-TGA570 (included with KX-TG5771) Example: KX-TGA570 (included with KX-TG5771) KX-TGA570 KX-TGA571 Press {s} (SP-PHONE), (included with (included with KX-TG5771) KX-TG5776/ then check if the dial KX-TG5777) tone is heard from the speaker on the back. {s} No dial tone Dial tone is heard. Try remedy for 1 on previous page. Check the telephone cord is properly connected to both the base unit and telephone jack on the wall. Still no dial tone Your telephone may need service when only back speaker provides a dial tone. Your telephone may need service. Please visit http://www. panasonic. com/phonehelp for further troubleshooting. ­8­ TG577x_QG(e). fm Page 9 Monday, February 20, 2006 3:22 PM Registering a handset to base unit The included handset and base unit are preregistered. [. . . ]