User manual PARKSIDE PABS 18-2 SL

[. . . ] Screwdriver /drill selector switch Spirit level Battery condition indicator Ventilation air inlet Forward/reverse switch ON/OFF switch Button for unlocking the battery Battery pack Torque selector Keyless chuck Fast charger (Charging time only 50-60 minutes) Green charge check light Red charge check light Contact Power consumption/Watt The power consumption in watts changes with the load. The measured power consumption during various types of use is e. : in 2nd gear with a 3 mm drill bit in softwood: in 1st gear with a 10 mm drill bit in (ST37) steel strip: in 1st gear with a 20 mm drill bit in softwood: The power consumption can reach over 1000 W. As the speed of the motor drops, the speed of the fan reduces and this may lead to the motor overheating. [. . . ] If you wish to charge a second battery pack, pull out the plug from the mains supply and keep the charger off for at least 15 minutes. Then you can start to charge the second battery. Note: If you do not remove the plug from the mains socket before the second charging process starts then the second battery cannot be charged. A new battery pack is not charged and must be fully charged before first use. Never charge the battery pack again immediately after a fast charging process has been completed. This can give rise to the battery pack being overcharged and a reduced life of the battery and charger. Switch off the charger for at least 15 minutes between charges by removing the plug from the mains socket. If you use a multiway socket adapter, unplug all other electrical equipment from the adapter. This ensures that for typical working and handling situations the drill is at the correct angle to the workpiece surface. In this way you can work precisely and much more effectively ­ try it out yourself . The particularly generously-sized controls make it particularly quick to adjust the way the tool works to the suit the task in hand. The SOFTGRIP handle reduces vibrations and makes working with your drill more comfortable, refer to Fig. The integrated hand guard is another ergonomic feature. In first gear (switch in setting: Screw) a speed of up to approx. This setting is intended for use with old screws and for accessories. In second gear (switch in setting: Drill/2) the speed is up to approx. The integral electric brake ensures the tool comes to a halt almost immediately, so that you can work more safely and quickly. You can check the condition of the battery with the battery in place. All lights on = full power / battery fully charged Before you start screwdriving you can set the torque selector in any of 16 torque settings to obtain the desired torque. Start off with a low setting (1 or 2 on the scale ) and try increasing it by stages until the best setting is reached. By doing this, screws can be driven to a predetermined depth, which is ideal for repetitive work. for drilling , turn the selector to the setting. [. . . ] Please keep your receipt as proof of purchase. For claims under warranty, please contact the customer service in your own country. The warranty covers only material or manufacturing faults, not normal wear or damage to fragile parts such as switches. The appliance is intended solely for private, not commercial, use. [. . . ]