User manual PARKSIDE PDS 290 A1

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. General safety advice for electrical power tools Careful handling and use of electrical power tools . Page Safety advice relating specifically to this device . The following pictograms are used in these operating instructions / on the device: Read instruction manual! [. . . ] An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) Pull the mains plug out of the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the A) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. B) Wear personal protective equipment and always wear safety glasses. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. c) Avoid unintentional operation of the device. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. Accidents can happen if you carry the device with your finger on the ON / OFF switch or with the device switched on. D) Remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury. General safety advice for electrical power tools / Preparing for use device. Many accidents have their origins in poorly maintained electrical power tools. Use the electrical power tool, accessories, inserted tools etc. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. [. . . ] If it is necessary to use the reducer piece 8 , push the reducer piece into the adapter for external vacuum extraction 7 . Push the hose of a suitable dust extraction de vice approved for that purpose (e. Pull off the adapter for external vacuum extraction 7 (with the reducer piece 8 if used). There is the danger of fire when working with electrical devices that have a dust box or can be connected to a vacuum cleaner. [. . . ]