User manual PARKSIDE PEC 200

[. . . ] Page 7 First use Switching on the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switching off the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preselecting the speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Advice on use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Always keep the device clean, dry and free of oil or grease. Always watch what you are doing and proceed with caution. Do not use the device if you cannot concentrate or you are feeling unwell. · · í Before use í To avoid danger of injury and hazards to health: · Wear protective glasses. Pieces of material may split off the workpiece and become projectiles. · Do not work on moistened materials or damp surfaces. · Do not soak the materials or the surface you are about to work on with liquids containing solvents. The heat generated during scraping can give rise to poisonous vapours or gases that are hazardous to health. · Secure the workpiece by holding it in a clamp or vice, otherwise the workpiece cannot be securely held in place and could cause injury. · Do not work on materials containing asbestos. · When working, always hold the device securely with both hands (see Fig. Never support yourself by placing your hands near or in front of the device or the workpiece surface. The sharp edges of the tools could cause injury. Keep children away from the mains lead and do not allow them to use the device. Children often underestimate the dangers associated with electrical equipment. Using the device safely: · If danger arises, pull the mains plug immediately out of the mains socket. · Never use the device for a purpose for which it was not intended. · Handle the device carefully and treat it with Quick-change tool holder cause injury. ½ Danger!The sharp edges of the tools could ½ The choice of tool depends on the intended task. The supplied accessories are suitable for the most common tasks (see figures C, D, E and F). Carry out a short test to determine the best tool for the task. Press the tool lock T backwards into the "Unlock" position. Push the tool attachment into the tool holder R until it reaches the stop. [. . . ] The device will not begin its working action until it makes UK 8 Cleaning and Disposal/Information í Cleaning and disposal í í Manufacturer`s Declaration of Conformity Cleaning Pull the mains lead out of the mains socket before you clean the device. ½ Always keep the device clean, dry and free of oil or grease. ½ Clean the tool holder regularly. ½ Clean the tool attachment so that it is free of residues of adhesive or other contaminants. [. . . ]